[Leetcode] 13. Roman to Integer

閱讀時間約 5 分鐘

題目 : 13. Roman to Integer

Roman numerals are represented by seven different symbols: IVXLCD and M.

Symbol       Value
I 1
V 5
X 10
L 50
C 100
D 500
M 1000

For example, 2 is written as II in Roman numeral, just two ones added together. 12 is written as XII, which is simply X + II. The number 27 is written as XXVII, which is XX + V + II.

Roman numerals are usually written largest to smallest from left to right. However, the numeral for four is not IIII. Instead, the number four is written as IV. Because the one is before the five we subtract it making four. The same principle applies to the number nine, which is written as IX. There are six instances where subtraction is used:

  • I can be placed before V (5) and X (10) to make 4 and 9. 
  • X can be placed before L (50) and C (100) to make 40 and 90. 
  • C can be placed before D (500) and M (1000) to make 400 and 900.

Given a roman numeral, convert it to an integer.


Example 1:

Input: s = "III"
Output: 3
Explanation: III = 3.

Example 2:

Input: s = "LVIII"
Output: 58
Explanation: L = 50, V= 5, III = 3.

Example 3:

Input: s = "MCMXCIV"
Output: 1994
Explanation: M = 1000, CM = 900, XC = 90 and IV = 4.


1.


class Solution:
def romanToInt(self, s: str) -> int:
# 先建立羅馬數字的字典roman
roman = {
"I": 1,
"V": 5,
"X": 10,
"L": 50,
"C": 100,
"D": 500,
"M": 1000
}
#字串是從最後面開始看,所以建立一個 s 的倒序字串 target,方便計算數字的總和(total)
target = s[::-1]
total = 0
if len(target) == 1: # 如果長度是1就可以直接回傳該羅馬字母所代表的數字
total = roman[s]
return total
i = 0
index = len(target)
while(i<len(s)):
#如果目前的羅馬數字>下一個羅馬字母的值,
#就可以將下一個羅馬字母的值減去目前的羅馬數字,再將i+2
if i+1 < index and roman[target[i]] > roman[target[i+1]]:
total = total + roman[target[i]] - roman[target[i+1]]
i = i+2
else:
# 若是其他的狀況則是將目前羅馬字母的值加到total
total = total + roman[target[i]]
i = i+1
return total



7會員
47Content count
這裡會放一些我寫過的 Leetcode 解題和學習新技術的筆記
留言0
查看全部
發表第一個留言支持創作者!
Youna's Devlog 的其他內容
你可能也想看
Thumbnail
重點摘要: 1.9 月降息 2 碼、進一步暗示年內還有 50 bp 降息 2.SEP 上修失業率預期,但快速的降息速率將有助失業率觸頂 3.未來幾個月經濟數據將繼續轉弱,經濟復甦的時點或是 1Q25 季底附近
Thumbnail
近期的「貼文發佈流程 & 版型大更新」功能大家使用了嗎? 新版式整體視覺上「更加凸顯圖片」,為了搭配這次的更新,我們推出首次貼文策展 ❤️ 使用貼文功能並完成這次的指定任務,還有機會獲得富士即可拍,讓你的美好回憶都可以用即可拍珍藏!
Thumbnail
題目會給定我們一組羅馬數字,要求我們把它轉換為對應十進位表示法的阿拉伯數字。
題目描述:給一個字串,依照題目給的表格,計算出字串對應的值並做加總 思路:依照題目給的表格做一個字典,接著定義一個變數做加總,並依照題目所給的前一位的值小於當前的值時,做相對應的處理
Thumbnail
Input: head = [1,2,3,4,5] Output: [3,4,5] 單看列表只是要找中間值,不過給定的資料結構不是陣列,而是鏈結串列。
Thumbnail
之前跳過的題目,回來補完成。 Input: nums = [1,2,3,4,5,6,7], k = 3 Output: [5,6,7,1,2,3,4]
Thumbnail
今日題目: 把一行字內每個單字都反轉字元。 Input: s = "Let's take LeetCode contest" Output: "s'teL ekat edoCteeL tsetnoc"
Thumbnail
今日題目:字串反轉 Input: s = ["h","e","l","l","o"] Output: ["o","l","l","e","h"]
Thumbnail
題目如下: Input: numbers = [2,7,11,15], target = 9 Output: [1,2]
Thumbnail
題目要求如下: Input: nums = [0,1,0,3,12] Output: [1,3,12,0,0] 把0都搬到後面去,非0的數字移到前面,且不更改原本數字的大小順序。
Thumbnail
Leetcode上正好有14天的讀書計畫,今天三題都是二分搜索,順手三題都寫一寫,想法上很固定。
Thumbnail
前幾天看別人直播刷題,心血來潮打開很久沒動的leetcode試試,挑了一題當初面試沒寫出來的題目。嗯...我那時才剛碰資料結構,知道要用stack寫卻沒實作過任何東西,現在有工作經驗後再來寫,看看會不會有不一樣的想法。
Thumbnail
重點摘要: 1.9 月降息 2 碼、進一步暗示年內還有 50 bp 降息 2.SEP 上修失業率預期,但快速的降息速率將有助失業率觸頂 3.未來幾個月經濟數據將繼續轉弱,經濟復甦的時點或是 1Q25 季底附近
Thumbnail
近期的「貼文發佈流程 & 版型大更新」功能大家使用了嗎? 新版式整體視覺上「更加凸顯圖片」,為了搭配這次的更新,我們推出首次貼文策展 ❤️ 使用貼文功能並完成這次的指定任務,還有機會獲得富士即可拍,讓你的美好回憶都可以用即可拍珍藏!
Thumbnail
題目會給定我們一組羅馬數字,要求我們把它轉換為對應十進位表示法的阿拉伯數字。
題目描述:給一個字串,依照題目給的表格,計算出字串對應的值並做加總 思路:依照題目給的表格做一個字典,接著定義一個變數做加總,並依照題目所給的前一位的值小於當前的值時,做相對應的處理
Thumbnail
Input: head = [1,2,3,4,5] Output: [3,4,5] 單看列表只是要找中間值,不過給定的資料結構不是陣列,而是鏈結串列。
Thumbnail
之前跳過的題目,回來補完成。 Input: nums = [1,2,3,4,5,6,7], k = 3 Output: [5,6,7,1,2,3,4]
Thumbnail
今日題目: 把一行字內每個單字都反轉字元。 Input: s = "Let's take LeetCode contest" Output: "s'teL ekat edoCteeL tsetnoc"
Thumbnail
今日題目:字串反轉 Input: s = ["h","e","l","l","o"] Output: ["o","l","l","e","h"]
Thumbnail
題目如下: Input: numbers = [2,7,11,15], target = 9 Output: [1,2]
Thumbnail
題目要求如下: Input: nums = [0,1,0,3,12] Output: [1,3,12,0,0] 把0都搬到後面去,非0的數字移到前面,且不更改原本數字的大小順序。
Thumbnail
Leetcode上正好有14天的讀書計畫,今天三題都是二分搜索,順手三題都寫一寫,想法上很固定。
Thumbnail
前幾天看別人直播刷題,心血來潮打開很久沒動的leetcode試試,挑了一題當初面試沒寫出來的題目。嗯...我那時才剛碰資料結構,知道要用stack寫卻沒實作過任何東西,現在有工作經驗後再來寫,看看會不會有不一樣的想法。